"As efficient and helpful as always! We have been loyal customers for over 20 years."
"Grant replaced our Rheem gas hot water heater and took the initiative to make pipework improvements."
"Even though fully booked found the time to repair the leak to prevent further water damage."
"Spent enough time making sure the whole drain was clean and not just the blockage site."
"Super reliable, professional, and always going the extra mile to keep our landlords and tenants happy."
"Prompt, professional and friendly service... fitting out my warehouse/workshop and toilet block."
Why Choose Northway
1946
Four Generations Since 1946
Northway has looked after Adelaide homes and businesses since 1946. Today, siblings Brett, Grant and Stacey Calladine carry on the family legacy: respect, trust and doing the job properly.
02
Same-Day Service
Most plumbing problems can’t wait, so we offer same-day service across Greater Adelaide. We turn up when we say we will, explain what we find and fix it properly.
03
Fixed Price, Up Front
You’ll know the price before we start, so there are no surprises on the invoice. Finance is available if you need it, and seniors get a discount on our standard pricing.
04
Lifetime Workmanship Guarantee
Every job is backed by a lifetime guarantee on our workmanship. That’s how a family business earns nearly 80 years of trust: no shortcuts, no compromises, and we stand behind our work.
05
24/7
24 Hour Emergency Service
Burst pipe, gas leak or no hot water? Our 24-hour emergency service covers Greater Adelaide. Our plumbers stay calm, make things safe and get you back up and running.
06
Licensed, Accredited and Trusted
We’re fully licensed for plumbing, gas fitting and electrical work (PGE 327229) and have been Master Plumbers SA members for 75 years. Councils, real estate agents and insurers trust us with their properties.

Backflow Devices Installed, Tested and Maintained to Protect Adelaide’s Water Supply
Backflow prevention in Adelaide stops water from your property flowing backwards into the public drinking water supply. Northway Plumbing, Aircon & Electrical installs, tests, repairs and replaces backflow prevention devices for businesses, strata buildings, rental properties and homes across all suburbs of Adelaide. We are a licensed family business since 1946, with fixed prices up front and a lifetime guarantee on workmanship. Call (08) 7282 0809.
Northway has looked after Adelaide properties for four generations. We assess the risk on your site, recommend the right device, install it, test it and help you stay on top of your yearly obligations. Whether you run a café, manage a medical practice, oversee a strata complex or own a home with non-standard connections, we can help.
What We Help With
Our backflow prevention services include:
- Site risk assessments to identify cross-connections and the hazard level of your water connection
- Supply and installation of dual check valves, double check valve assemblies and reduced pressure zone devices
- Annual testing of testable devices, with the test report completed for your records
- Servicing and repairs for devices that fail testing
- Replacement of ageing or unsuitable devices
- Portfolio reviews for strata managers and landlords with several properties
- Fire service and irrigation line protection, coordinated with your other plumbing work
Northway has looked after Adelaide homes and businesses since 1946. Today, siblings Brett, Grant and Stacey Calladine carry on the family legacy: respect, trust and doing the job properly.
06
Rheem has supplied Australian homes since 1939. Our licensed Adelaide plumbers repair Rheem electric and gas storage, gas continuous flow, solar and AmbiPower heat pump systems, fixing leaks and trips.
Licensed, Accredited and Trusted
06
Licensed, Accredited and Trusted
Our licensed Adelaide plumbers service and repair Rinnai Infinity gas and Efinity electric continuous flow units, heat pumps, solar systems and storage tanks, including regular relief valve and anode checks.
Licensed, Accredited and Trusted
06
German-engineered Stiebel Eltron instantaneous and compact water heaters deliver hot water on demand. Our licensed Adelaide electricians and plumbers repair single and three-phase units, under-sink boilers and compact storage heaters.
06
Licensed, Accredited and Trusted
Made by Rheem, Vulcan electric and gas storage water heaters use high-strength steel, with spare parts available. Our licensed Adelaide plumbers diagnose and repair leaking, tripping or cold Vulcan systems.
Stiebel Eltron
German-engineered Stiebel Eltron instantaneous and compact water heaters deliver hot water on demand. Our licensed Adelaide electricians and plumbers repair single and three-phase units, under-sink boilers and compact storage heaters.
Commercial
Burst pipe, blocked sewer or overflowing toilet in the middle of the night? Our licensed Adelaide plumbers respond 24/7, find the fault fast and certify every job with the regulator.
Residential
Emergencies
Our licensed backflow plumbers install, test and commission backflow devices for Adelaide homes, businesses and growers, matching each to its hazard rating and reporting to the regulator within seven days.
Trade waste, grease arrestors and backflow protection for Adelaide businesses. Our commercial plumbers keep sites from Edinburgh Parks to Northern Adelaide Plains growers compliant with SA Water and regulator requirements.
Backflow Prevention
From leaking taps, toilets and showers, our licensed plumbers look after Adelaide homes, with every job certified to the Technical Regulator and covered by SA’s 10-year defective work warranty.
The City of Mitcham has trusted Northway with public projects including toilet facilities at CC Hood Reserve and Hillview Reserve, the Hawthorn Community Centre kitchen, and recent pipe relining at the Mitcham Civic Centre.
Trusted by Local Councils
Meet Brett and Grant Calladine, Owners of Northway
Brett and Grant Calladine are the fourth generation of the Northway family. Their great-grandfather, Ernest John Northway, started the business in Adelaide in 1946. Today, the two brothers run it as Directors, with their sister Stacey managing the office. Brett leads the business as General Manager, and in 2019 he was named Certified Trade Professional of the Year at the Master Builders SA Building Excellence Awards. Grant runs day-to-day operations and is often the one who comes out to quote, making sure every job is done properly from start to finish.
Together, they lead a team of experienced licensed plumbers and apprentices, keeping alive the family values Ern started with: respect, trust and honest workmanship. When you call Northway, you’re dealing with a family business that has stood behind its work for nearly 80 years.
Accreditations & Licences
We hold the licences and industry accreditations that matter for Plumbing, Electrical and Air Conditioning in Adelaide, so every job we do is fully compliant and backed by recognised industry bodies.
Awards, Recognition and Media
For nearly 80 years, Northway has built its reputation one job at a time. Along the way, our team and our work have been recognised by South Australia’s leading industry bodies, local councils and the customers we look after every day.
Certified Trade Professional of the Year
Director Brett Calladine was named Certified Trade Professional of the Year at the 2019 Master Builders SA Building Excellence Awards. The award recognises the highest standards of skill, professionalism and workmanship in South Australian trades.
Master Plumbers SA Member of the Month
Northway was named Member of the Month by Master Plumbers SA and featured in a two-page spread in the association’s newsletter. In it, Gill, Brett and Grant shared their insights on the plumbing industry.
75 Years with Master Plumbers SA
In 2025, Grant and Brett received a commemorative certificate at the Master Plumbers SA President’s Luncheon, marking 75 years of membership. Northway is one of the association’s longest-standing member businesses.
Trusted by Local Councils
The City of Mitcham has trusted Northway with public projects including toilet facilities at CC Hood Reserve and Hillview Reserve, the Hawthorn Community Centre kitchen, and recent pipe relining at the Mitcham Civic Centre.

Workmanship Guarantees & Product Warranties
Every job Northway completes comes with a lifetime guarantee on our workmanship. If something we’ve done isn’t right, we’ll come back and fix it. We combine old-school service values with modern techniques and cutting-edge equipment, from thermal imaging leak detection to CCTV drain cameras and pipe relining, so problems are found accurately and fixed properly the first time.
We use quality, approved materials from trusted Australian suppliers, and the hot water systems, tapware, fixtures and parts we install carry their manufacturer’s warranty too. Our family has stood behind its work since 1946, and that hasn’t changed.
No shortcuts. No compromises. Just work you can rely on.
Backflow Prevention Rules and Regulations in Adelaide
In South Australia, backflow prevention is specialist work. The Office of the Technical Regulator (OTR) requires backflow devices to be installed and commissioned by a licensed plumber who also holds backflow prevention accreditation. The commissioning, inspection and maintenance report must be lodged with the OTR within seven days of the work. Backflow devices are named in the plumbing licence scope set by Consumer and Business Services under the Plumbers, Gas Fitters and Electricians Act 1995. That means the business needs a plumbing contractor’s licence, and the tester must be a registered plumber.
Device selection and installation follow the Plumbing Code of Australia (NCC Volume Three) and AS/NZS 3500.1, which match the hazard rating of a site to the right type of device. A café, medical practice or workshop needs a different device from a home garden irrigation system. Fire services carrying backflow devices also face OTR pressure testing. If you own a commercial or multi-tenancy property, keep every inspection and maintenance report together. They are your evidence that the drinking water supply is protected, and that you have met your obligations as the property owner.
Emergency work still gets certified. A plumber must lodge an electronic Certificate of Compliance with the Office of the Technical Regulator within 7 days. Their CBS licence number must appear on all advertising.
Backflow Prevention Facts in Adelaide
Every site gets a hazard rating. Under AS/NZS 3500.1, backflow hazards are rated low, medium or high. The device has to match the rating: a car wash or chemical store needs more than a house.
New meters have basic protection built in. New 20 mm SA Water meters include a low-hazard dual check valve. Services of 25 mm and larger need a separate device at the boundary, matched to the hazard rating and installed by a licensed plumber.
Only accredited plumbers can do it. Backflow devices must be installed and commissioned by a licensed plumber with backflow accreditation. The test report must reach the Office of the Technical Regulator (OTR) within 7 days.
Testing is recorded with the regulator.The OTR’s backflow test report form includes an annual test option. Test gauges must be calibrated every year to AS 2845.
The north irrigates on a big scale. The Northern Adelaide Plains grows 40% of SA’s vegetables by value, and Playford has more than 1,000 ha of greenhouses. Irrigation and chemical dosing systems like these are the reason backflow rules exist.
It protects a huge shared network. SA Water runs 27,541 km of water mains, serving more than 1.8 million people. One unprotected connection can contaminate supply for everyone downstream.
Adelaide Backflow Prevention Local Snapshot
The numbers that matter for backflow compliance in Adelaide.
Hazard ratings
Low / Medium / High
AS/NZS 3500.1
Boundary device trigger
25 mm+ services
SA Water requirement
Report to regulator
Within 7 days
OTR, after install or test
Gauge calibration
Every year
AS 2845, per OTR form
SA Water mains
27,541 km
2024–25
People supplied
1.8 million+
SA Water, 2024–25

Backflow Prevention Cost in Adelaide
In Adelaide, testing a backflow prevention device typically costs $130 to $280+ for the first device and $75 to $130+ for each additional device tested on the same visit. If your property needs a new device, supply and installation usually costs $520 to $2,150+, depending on the device type, the pipe size and how hard the site is to work on.
Under SA Water requirements, testable backflow devices must be inspected at least once a year by an accredited tester, with the results lodged. Missing a test can leave you out of compliance. Northway tests, repairs and installs backflow devices across Adelaide, lodges the test reports for you and can send yearly reminders so your property never falls behind. Sites with several devices usually pay less per device when all the tests are booked in one visit.
Understanding Backflow Prevention in Adelaide
Backflow is the unwanted reverse flow of water from a private plumbing system back into the public water supply. A backflow prevention device is a valve assembly fitted to your water service that lets clean water in but stops water flowing back the other way.
Adelaide’s water network is shared. If a property has an unprotected cross-connection, contaminated water could be drawn back into the mains that serve the street. That is why SA Water requires backflow protection on properties where the risk calls for it, and why businesses, body corporates and landlords need to understand their obligations.
What Is Backflow and How Does It Happen?
Backflow happens in two main ways.
- Backsiphonage occurs when pressure in the water main suddenly drops. A burst main in your street or heavy use of nearby fire hydrants can create a suction effect, a bit like drinking through a straw, that pulls water backwards through any unprotected connection.
- Backpressure occurs when pressure inside a property’s system is higher than in the main. Pumps, boilers, elevated tanks and pressurised equipment on commercial and industrial sites can push water and anything in it back into the supply.
- Cross-connections are what make both of these dangerous. A garden hose left sitting in a pool, an irrigation line connected to a drinking water outlet or a chemical dosing system linked to the supply are all pathways for contamination.


What Does a Backflow Prevention Device Do?
A backflow prevention device acts as a one-way safety valve. Water flows into your property as normal, but if it starts moving the wrong way, internal check valves close.
Testable devices typically include:
- Check valves that seal when they sense reverse flow
- A relief valve (on higher-rated devices) that discharges water safely if the check valves do not fully seal
- Test points that let a licensed plumber connect gauges and confirm the device is working
Containment devices are usually fitted near the water meter or main isolation point, so they protect the whole connection and nothing from inside your property can reach the shared supply.
Major Leaks Under Sinks, Basins and Appliances
Roof, Gutter and Storm-Related Plumbing Emergencies
Flexible hoses under kitchen sinks and vanities, dishwasher connections and basin wastes are common failure points, and they can fail without warning. A leak that starts overnight or while you are away can swell cupboard bases and damage flooring.
When you call, we can talk you through closing the isolation valve or turning off the appliance. We then replace the failed hoses, valves or pipework and check for other hidden leaks.
Heavy Adelaide downpours test gutters, downpipes and stormwater drainage. Blocked downpipes, overflowing gutters and failed flashings can send water through ceilings and into insulation.
In a storm, we focus on making things safe: clearing blocked downpipes and drains and restoring drainage flow. Once conditions allow, follow-up repairs can be arranged through our leaking roof repairs and blocked stormwater drain teams.
Backflow Prevention Devices and Services We Offer in Adelaide
Our work starts with understanding your property. We assess the risk on your water connection, identify cross-connections, select a suitable device and look after installation, commissioning and ongoing testing.
As a family business now in its fourth generation, we have seen plumbing standards change many times. Our focus is on getting compliance right the first time, not just ticking a box for today.
Common Types of Backflow Prevention Devices
Backflow devices are matched to the hazard level of the site:
Dual check valves are used for low hazard situations, where any contamination would not be a health risk. On some newer residential water meters, a dual check valve is built into the meter assembly.
Double check valve assemblies suit medium hazard sites, where contamination could affect health. Examples include irrigation systems, some commercial kitchen equipment and shared fire services.
Reduced pressure zone devices are used for high hazard situations involving toxic or harmful substances, such as chemical dosing lines or industrial process water. In some cases, an air gap or break tank is the safest option.
Fitting the wrong type of device can leave a property non-compliant even though a device is in place, so we assess each site individually before recommending anything.
Where Devices Are Typically Installed on Adelaide Properties
Typical locations include:
- Above ground in a protective cage near the water meter on commercial sites
- In a secure box at the boundary for strata and multi-unit properties
- On dedicated lines feeding fire services, irrigation or process water
Devices must stay accessible for testing and maintenance. Over time, landscaping, storage and building additions can block access, so we design installations with test points easy to reach and isolation valves clearly identified.
Our Backflow Prevention Services Across Adelaide
Our services cover the full cycle:
- Assessment and advice for new builds, renovations and change-of-use tenancies
- Supply and installation of new devices, coordinated with SA Water requirements where they apply
- Annual testing and reporting for existing devices, using calibrated test equipment
- Servicing, repairs and replacement with honest advice on repair versus replacement
- Clear records so you always know when your next test is due
Same-day service is available for urgent backflow problems where possible, every job has a fixed price up front, and all our work carries a lifetime guarantee on workmanship.
06
Fixed price. You approve a fixed price before work begins.
Annual Backflow Testing and Certification Process
How Backflow Device Installation and Testing Works
Getting a device installed or tested does not need to be complicated. Here is what to expect.
Step-by-Step: Installing a New Backflow Prevention Device
A new device is usually needed when a property changes use, when SA Water asks for one, when a missing or unsuitable device is found, or when an existing device cannot be repaired.
01
Site assessment. A licensed Northway plumber inspects your pipework, identifies cross-connections and assesses the risk, including irrigation, fire services, process water and alternative supplies.
02
Hazard rating. We confirm the hazard level and the type of device required.
03
Fixed price. You receive a written scope with a fixed price up front and timing, including any water shutdown needed.
04
Installation and commissioning. We install the device in an accessible, above-ground position with isolation valves, pressure test the connections and commission it.
05
First test and paperwork. We carry out the first test and complete the commissioning and test paperwork, with a copy for your records.
Annual Backflow Testing and Certification Process
SA Water requires testable backflow prevention devices to be tested every year, so you can be confident the device is still protecting your property and the public supply. Our annual test follows a simple sequence:
01
Pre-test check. We confirm the device’s location, condition and access, and let occupants know about a short water interruption.
02
Functional test. Using calibrated gauges on the test points, we check the check valves and relief valve against the required standards.
03
Minor servicing. Where possible, we clean seats or replace worn seals during the visit to bring the device back within limits.
04
Reporting.
We complete the test report and give you a copy.
Testing a single device is usually completed within a standard appointment.
Choosing Between Repair, Rebuild or Replacement
Seals wear, springs tire and parts corrode. Some older devices eventually fail testing despite regular maintenance. When that happens, we help you decide by:
01
Assessing the age and condition of the device and whether parts are still available
02
Comparing the cost of a repair kit or rebuild with a full replacement
03
Considering whether the site’s use or hazard level is likely to change
Every option comes with a fixed price up front. Our lifetime guarantee on workmanship covers the quality of our work, while normal wear of internal parts is managed through annual testing.
Common Backflow Issues in Adelaide and How We Resolve Them
Many Adelaide property owners only learn about backflow prevention when a compliance notice arrives or a water quality concern comes up. These are the issues we see most.
Problem 1: Missed Annual Testing Deadlines
Landlords, strata managers and business owners can easily lose track of test dates, and missed tests can lead to compliance notices. We help by:
- Keeping clear records of your devices and test dates
- Offering flexible appointments across all suburbs of Adelaide, including coordinated testing for several properties
- Providing test reports you can keep with your compliance records
Problem 2: Failed Backflow Test Results
A failed test means the device is not holding the required pressure difference, is leaking or has seized parts. A device that is not working cannot protect the water supply, so it should not be left.
Our response:
- We explain in plain English what failed and why
- Where needed, we take short-term steps to protect the supply while a repair is arranged
- We give you a fixed price for repair or replacement and schedule the work promptly, with all work covered by our lifetime guarantee on workmanship
Problem 3: Not Knowing If Your Property Has a Device or Needs One
This is more common than you might think. New facility managers, buyers of older properties and landlords taking over tenancies often have no record of whether a device exists, let alone when it was last tested.
We can:
- Locate existing devices near the meter, in plant rooms, valve boxes or on fire service lines
- Review the property’s water systems and likely hazard level
- Give written advice on what is needed, whether that is a new device, an upgrade or simply a test
Why Adelaide Property Owners Trust Our Licensed Plumbers
Chris X.
"Punctual, professional, and transparent with pricing. They diagnosed the issue quickly, completed quality repairs, cleaned up perfectly, and emailed the compliance certificate and photos the same day."
Sandor K.
"Great care taken and proper safety rules followed. Well done."
Lachlan T.
"We've relied on Northway Plumbing and Gas for the majority of our property management maintenance, and they have been outstanding every time."
Sergey R.
"I would like to thank Craig for inspecting my unit and replacing malfunctioning isolation taps."
Backflow Prevention Across Adelaide
We service all suburbs of Adelaide. Our team installs and tests backflow prevention devices for cafés and restaurants in the CBD and along The Parade and Jetty Road, workshops and factories around Wingfield, Lonsdale and Edwardstown, medical and aged care sites from Elizabeth to Noarlunga, and strata buildings and homes across Glenelg, Unley, Modbury and Golden Grove.
Next Steps
Backflow prevention protects Adelaide’s shared drinking water. Without a working device, contaminated water from a private system can find its way back into the mains when pressure changes. For properties that need protection, staying compliant is about more than avoiding a notice: it keeps water safe for everyone connected to the network.
Northway provides the complete service, from assessment and installation to annual testing, repairs and replacement, across all suburbs of Adelaide.
Your next step depends on your situation:
- Business owners and facility managers: book an on-site assessment and test to confirm your site meets current requirements.
- Strata managers and landlords: ask us to review the devices across your portfolio and set up a testing calendar.
- Homeowners: ask us whether your property needs backflow protection, especially if you have irrigation, a pump or a connected rainwater tank.
Call Northway Plumbing, Aircon & Electrical on (08) 7282 0809 or contact us. If your property needs general plumbing work too, our commercial plumbing and residential plumbing teams can help on the same visit.
FAQs about Backflow Prevention in Adelaide
How often do backflow prevention devices need testing in Adelaide?
Testable backflow prevention devices need to be tested every year under SA Water’s requirements. The test confirms the check valves and relief valve are working correctly. If you are not sure whether your device is testable or when it was last tested, Northway can locate it, check its records and book the test.Who is responsible for backflow prevention on my property?
The property owner, or the body corporate for strata-titled properties, is responsible for installing and maintaining backflow prevention devices and arranging annual testing. Tenants and property managers often coordinate access. Northway works directly with owners, managers and tenants to organise testing days with as little disruption as possible.How can I tell if I already have a backflow prevention device?
Look near the water meter at the front boundary, in valve boxes along the water service, or in plant rooms and riser cupboards in larger buildings. A device is usually a brass or stainless steel assembly with isolation valves on each side and small test points on the body. If you cannot find one, we can locate and assess it for you.What are the signs I might have a backflow problem?
Warning signs include discoloured or dirty water from taps, an unusual taste or smell in drinking water, or recent plumbing changes, such as new irrigation, pumps or process equipment, without a backflow upgrade. Any suspected backflow issue should be checked by a licensed plumber promptly. Call Northway on (08) 7282 0809.Does a home need backflow prevention?
Many homes are low hazard and are protected by the dual check valve in the water meter. Homes with irrigation systems, pumps, pools with auto-fill, or a rainwater tank connected to household plumbing may need additional protection. Northway can assess your home and tell you plainly whether anything more is needed.
