"As efficient and helpful as always! We have been loyal customers for over 20 years."
"Grant replaced our Rheem gas hot water heater and took the initiative to make pipework improvements."
"Even though fully booked found the time to repair the leak to prevent further water damage."
"Spent enough time making sure the whole drain was clean and not just the blockage site."
"Super reliable, professional, and always going the extra mile to keep our landlords and tenants happy."
"Prompt, professional and friendly service... fitting out my warehouse/workshop and toilet block."
Why Choose Northway
1946
Four Generations Since 1946
Northway has looked after Adelaide homes and businesses since 1946. Today, siblings Brett, Grant and Stacey Calladine carry on the family legacy: respect, trust and doing the job properly.
02
Same-Day Service
Most plumbing problems can’t wait, so we offer same-day service across Greater Adelaide. We turn up when we say we will, explain what we find and fix it properly.
03
Fixed Price, Up Front
You’ll know the price before we start, so there are no surprises on the invoice. Finance is available if you need it, and seniors get a discount on our standard pricing.
04
Lifetime Workmanship Guarantee
Every job is backed by a lifetime guarantee on our workmanship. That’s how a family business earns nearly 80 years of trust: no shortcuts, no compromises, and we stand behind our work.
05
24/7
24 Hour Emergency Service
Burst pipe, gas leak or no hot water? Our 24-hour emergency service covers Greater Adelaide. Our plumbers stay calm, make things safe and get you back up and running.
06
Licensed, Accredited and Trusted
We’re fully licensed for plumbing, gas fitting and electrical work (PGE 327229) and have been Master Plumbers SA members for 75 years. Councils, real estate agents and insurers trust us with their properties.
Our 24/7 emergency plumbers in Adelaide attend:

Bosch HydroPower and Continuous Flow Units That Won’t Light, Fixed Properly Across Adelaide
Northway Plumbing, Aircon & Electrical handles Bosch hot water repairs in Adelaide, with most calls involving Bosch gas continuous flow units, including HydroPower models that light using the flow of water rather than mains power. We also repair Bosch electric and heat pump systems. Our licensed team offers same-day service and fixed prices up front across all suburbs of Adelaide. Call (08) 7282 0809.
Bosch hot water units are often chosen for compact homes, townhouses and older properties where there is no power point near the hot water. That design brings its own particular faults, and many of the Bosch calls we take start with the same sentence: “it clicks but it won’t light.”
Northway is a fourth-generation South Australian family business, operating since 1946. Our team holds Plumber, Electrical & Gas Fitting Licence PGE 327229, which means one visit covers the gas, water and electrical side of your Bosch unit. Whether you are a homeowner with a cold shower this morning, a landlord fielding tenant complaints, or a cafe that needs hot water to open, we attend, diagnose the fault and fix it, with 24/7 emergency service for gas concerns or a complete loss of hot water.
What We Help With
- Bosch HydroPower units that won’t light or keep cutting out
- Pilot ignition faults, thermocouples and blocked pilot jets
- Older electronic Bosch models, including Optiflow and Highflow
- Flame sensor, flow sensor and gas valve repairs
- Heat exchanger scale and descaling
- Low-flow problems caused by aerators, shower heads or old pipework
- Leaks, corrosion and relief valve replacement
- Bosch electric and heat pump fault finding
- Error codes and lockouts
Northway has looked after Adelaide homes and businesses since 1946. Today, siblings Brett, Grant and Stacey Calladine carry on the family legacy: respect, trust and doing the job properly.
06
Rheem has supplied Australian homes since 1939. Our licensed Adelaide plumbers repair Rheem electric and gas storage, gas continuous flow, solar and AmbiPower heat pump systems, fixing leaks and trips.
Licensed, Accredited and Trusted
06
Licensed, Accredited and Trusted
Our licensed Adelaide plumbers service and repair Rinnai Infinity gas and Efinity electric continuous flow units, heat pumps, solar systems and storage tanks, including regular relief valve and anode checks.
Licensed, Accredited and Trusted
06
German-engineered Stiebel Eltron instantaneous and compact water heaters deliver hot water on demand. Our licensed Adelaide electricians and plumbers repair single and three-phase units, under-sink boilers and compact storage heaters.
06
Licensed, Accredited and Trusted
Made by Rheem, Vulcan electric and gas storage water heaters use high-strength steel, with spare parts available. Our licensed Adelaide plumbers diagnose and repair leaking, tripping or cold Vulcan systems.
Stiebel Eltron
German-engineered Stiebel Eltron instantaneous and compact water heaters deliver hot water on demand. Our licensed Adelaide electricians and plumbers repair single and three-phase units, under-sink boilers and compact storage heaters.
Commercial
Burst pipe, blocked sewer or overflowing toilet in the middle of the night? Our licensed Adelaide plumbers respond 24/7, find the fault fast and certify every job with the regulator.
Residential
Emergencies
Our licensed backflow plumbers install, test and commission backflow devices for Adelaide homes, businesses and growers, matching each to its hazard rating and reporting to the regulator within seven days.
Trade waste, grease arrestors and backflow protection for Adelaide businesses. Our commercial plumbers keep sites from Edinburgh Parks to Northern Adelaide Plains growers compliant with SA Water and regulator requirements.
Backflow Prevention
From leaking taps, toilets and showers, our licensed plumbers look after Adelaide homes, with every job certified to the Technical Regulator and covered by SA’s 10-year defective work warranty.
The City of Mitcham has trusted Northway with public projects including toilet facilities at CC Hood Reserve and Hillview Reserve, the Hawthorn Community Centre kitchen, and recent pipe relining at the Mitcham Civic Centre.
Trusted by Local Councils
Meet Brett and Grant Calladine, Owners of Northway
Brett and Grant Calladine are the fourth generation of the Northway family. Their great-grandfather, Ernest John Northway, started the business in Adelaide in 1946. Today, the two brothers run it as Directors, with their sister Stacey managing the office. Brett leads the business as General Manager, and in 2019 he was named Certified Trade Professional of the Year at the Master Builders SA Building Excellence Awards. Grant runs day-to-day operations and is often the one who comes out to quote, making sure every job is done properly from start to finish.
Together, they lead a team of experienced licensed plumbers and apprentices, keeping alive the family values Ern started with: respect, trust and honest workmanship. When you call Northway, you’re dealing with a family business that has stood behind its work for nearly 80 years.
Accreditations & Licences
We hold the licences and industry accreditations that matter for Plumbing, Electrical and Air Conditioning in Adelaide, so every job we do is fully compliant and backed by recognised industry bodies.
Awards, Recognition and Media
For nearly 80 years, Northway has built its reputation one job at a time. Along the way, our team and our work have been recognised by South Australia’s leading industry bodies, local councils and the customers we look after every day.
Certified Trade Professional of the Year
Director Brett Calladine was named Certified Trade Professional of the Year at the 2019 Master Builders SA Building Excellence Awards. The award recognises the highest standards of skill, professionalism and workmanship in South Australian trades.
Master Plumbers SA Member of the Month
Northway was named Member of the Month by Master Plumbers SA and featured in a two-page spread in the association’s newsletter. In it, Gill, Brett and Grant shared their insights on the plumbing industry.
75 Years with Master Plumbers SA
In 2025, Grant and Brett received a commemorative certificate at the Master Plumbers SA President’s Luncheon, marking 75 years of membership. Northway is one of the association’s longest-standing member businesses.
Trusted by Local Councils
The City of Mitcham has trusted Northway with public projects including toilet facilities at CC Hood Reserve and Hillview Reserve, the Hawthorn Community Centre kitchen, and recent pipe relining at the Mitcham Civic Centre.

Workmanship Guarantees & Product Warranties
Every job Northway completes comes with a lifetime guarantee on our workmanship. If something we’ve done isn’t right, we’ll come back and fix it. We combine old-school service values with modern techniques and cutting-edge equipment, from thermal imaging leak detection to CCTV drain cameras and pipe relining, so problems are found accurately and fixed properly the first time.
We use quality, approved materials from trusted Australian suppliers, and the hot water systems, tapware, fixtures and parts we install carry their manufacturer’s warranty too. Our family has stood behind its work since 1946, and that hasn’t changed.
No shortcuts. No compromises. Just work you can rely on.
Bosch Hot Water Repair Rules and Regulations in Adelaide
Bosch hot water repairs in Adelaide are mostly gas work, so they come under the Gas Act 1997 and the Gas Regulations 2012. Safety is policed by the Office of the Technical Regulator (OTR). Anyone working on the gas supply, burner or controls must be a gas fitter registered with Consumer and Business Services. The business must hold a gas fitting contractor’s licence under the Plumbers, Gas Fitters and Electricians Act 1995. Servicing or repairs that leave the appliance unmodified from the manufacturer’s specifications don’t need a gas Certificate of Compliance. Changes to the gas installation do, and failing to issue one can attract penalties of up to $5,000. Gas work must meet AS/NZS 5601.1:2022.
Any replacement appliance must be a certified Type A appliance before it can be installed in South Australia. Water-side repairs follow AS/NZS 3500.4 and need a plumbing eCoC within seven days when the work is certifiable. Repairing a faulty unit doesn’t trigger the state’s water heater efficiency rules, but replacing it does. Ask your technician to show their gas fitter registration, and to confirm whether the job needs an eCoC.
Bosch Facts
Australian water heater production at Clayton, Victoria ended in 2000. Bosch no longer sells its Optiflow and Highflow continuous-flow units, but spares and warranty support continue. The current range is HydroPower, pilot-ignition gas and Tronic electric instantaneous. Bosch recommends a service every 2 years.

Bosch Hot Water Repairs Cost in Adelaide
Repairs to a Bosch hot water system in Adelaide typically cost $180 to $550+. The price depends on the model and the part involved, along with whether a genuine replacement part needs to be ordered. Common faults on Bosch continuous flow units include ignition problems, faulty flow sensors, temperature controllers that aren’t working, and error codes caused by a blocked flue or poor gas supply. Simple fixes such as cleaning a filter or resetting a controller sit at the lower end of the range. Replacing an igniter, a fan or a printed circuit board costs more. If your unit is still under the manufacturer’s warranty, check the warranty conditions before booking. Northway diagnoses Bosch units on site, explains whether the fault is worth repairing given the system’s age, and quotes a fixed price before any parts are fitted.
How Your Bosch Hot Water System Works (In Plain English)
A Bosch continuous flow unit sits idle until you open a hot tap. Water starts moving through the unit, the unit senses or harnesses that flow, and the burner lights. The water is heated as it passes through the heat exchanger. When you close the tap, the burner goes out. No water is stored.
That is why water flow matters so much with Bosch units, and particularly with HydroPower models. If too little water moves through the unit, it may not light at all. A blocked shower head, a clogged tap aerator, a partly closed valve or old, narrow pipework can all keep the flow below what the unit needs.
A Bosch storage system works differently. An element or burner heats a tank and keeps it hot. A sacrificial anode corrodes in place of the tank walls, and once it is used up, the tank itself is exposed.
Parts that wear over time include the ignition system, pilot or thermocouple, flame sensor, flow sensor, gas valve, thermostat and heat exchanger, plus the anode and element on storage units. Mineral scale from Adelaide’s water builds up on heat exchangers, valves and sensors and gradually affects performance.
Common Types of Bosch Hot Water Units We Repair
Bosch gas continuous flow units are the Bosch systems we repair most often in Adelaide. They come in a few different ignition styles, and each behaves differently when something goes wrong:
- HydroPower models use water flowing through the unit to generate the spark that lights the burner. There is no standing pilot and no power point needed.
- Pilot ignition models keep a small pilot flame burning so the burner can light on demand, again without needing mains power.
- Older electronic models, such as the Optiflow and Highflow, use a power supply and electronic controls.
Because many Bosch gas units don’t need a power point, they suit older Adelaide homes and tight spaces such as townhouse courtyards and small cafes.
- Bosch electric water heaters heat water either instantaneously or in a storage tank. Storage models use internal elements and, in glass-lined steel tanks, a sacrificial anode to protect against corrosion.
- Bosch heat pump systems take warmth from the surrounding air to heat water into a storage tank. They are popular in newer homes and properties with rooftop solar.
We repair Bosch residential units regardless of who installed them or when. That includes heritage suburbs with older pipework, new estates, and coastal suburbs such as Glenelg and Brighton, where salt air can be hard on external units and flues.


Understanding Bosch Hot Water Systems in Adelaide Homes
A Bosch hot water system heats water for your home using gas, electricity or a heat pump, depending on the model. In Adelaide homes, the Bosch units we see most are gas continuous flow systems. They heat water only as it passes through the unit and switch off when you close the tap, so no hot water is stored. Many Bosch gas models don’t need a power point, which makes them a common choice for older homes, townhouse courtyards and small businesses where space and power access are limited.
Adelaide’s water carries minerals that slowly leave scale on heat exchangers, valves and sensors. Over time this affects how well any Bosch unit performs, so the type of system you have and its age shape how we approach a repair. Northway Plumbing, Aircon & Electrical repairs all common Bosch residential models under Plumber, Electrical & Gas Fitting Licence PGE 327229. That licence covers the gas, plumbing and electrical sides of the job in one visit.
Major Leaks Under Sinks, Basins and Appliances
Roof, Gutter and Storm-Related Plumbing Emergencies
Flexible hoses under kitchen sinks and vanities, dishwasher connections and basin wastes are common failure points, and they can fail without warning. A leak that starts overnight or while you are away can swell cupboard bases and damage flooring.
When you call, we can talk you through closing the isolation valve or turning off the appliance. We then replace the failed hoses, valves or pipework and check for other hidden leaks.
Heavy Adelaide downpours test gutters, downpipes and stormwater drainage. Blocked downpipes, overflowing gutters and failed flashings can send water through ceilings and into insulation.
In a storm, we focus on making things safe: clearing blocked downpipes and drains and restoring drainage flow. Once conditions allow, follow-up repairs can be arranged through our leaking roof repairs and blocked stormwater drain teams.
Signs Your Bosch Hot Water System Needs Repair
Catching a Bosch fault early usually means a simpler repair.
Red-Flag Issues That Need Immediate Attention
- A gas smell near the Bosch unit. Don’t use switches or appliances nearby, move everyone away and call Northway on (08) 7282 0809 for 24/7 emergency service.
- Scorching, soot or a burning smell. This indicates a combustion or flue problem. Turn the unit off if it is safe to do so and call us.
- A significant leak. Turn off the water to the unit and contact us.
- Tripping circuits on electric or heat pump units. Leave the circuit off and call a licensed technician.
- No hot water at all when gas and power are confirmed on.
It is unsafe and against the rules for unlicensed people to work on gas hot water appliances in South Australia.
Early Warning Signs You Can Spot
- Temperature swings in the shower. Often a sensor, thermostat or flow problem, or scale restricting flow.
- The unit lights, runs briefly, then shuts off. Intermittent sensor signals or marginal gas pressure are common causes, and it tends to get worse.
- Unusual noises. Rumbling from a storage tank often means sediment on the element. Popping or crackling from a continuous flow unit can point to scale in the heat exchanger.
- Small damp patches around valves, connections or the base of a tank.
- Hot water only at some taps. A sign that low flow at certain outlets isn’t enough to keep the unit lit.
Landlords and property managers can save a midnight call-out by asking tenants to report these signs early.
When It Might Be Time To Think About Replacement Instead
If a Bosch unit breaks down repeatedly over a few months, shows corrosion on the tank or casing, or needs parts that are hard to source, repeated repairs may cost more than a planned replacement. Older electronic models can be harder to find parts for. We will assess this honestly on site.
06
Fixed price. You approve a fixed price before work begins.
Our Bosch Hot Water Repair Process in Adelaide
Step-by-Step: From First Call To Hot Water Restored
01
Call us on (08) 7282 0809. Describe what the unit is doing and, if you can, the Bosch model and its rough age. Homes with no hot water, gas safety concerns and businesses such as childcare centres are prioritised.
02
We book a visit. We offer same-day service, and 24/7 emergency service when it can’t wait.
03
We diagnose the fault. Our technician explains the findings and gives you a fixed price up front before any work begins.
04
We repair it. Once you approve the price, we carry out the work.
05
We test and tidy up. We confirm safe operation at your taps, clean up the work area and explain what was done.
What Our Licensed Technicians Check On Site
A Bosch repair visit follows a structured set of checks:
- Gas supply pressure, and that the gas type (natural gas or LPG) matches the unit
- Water flow to and through the unit, including shower heads, tap aerators and inlet filters
- The ignition system, pilot or thermocouple, and flame sensor
- Thermostat and sensor operation
- The heat exchanger, for scale or damage
- The casing and fittings, for corrosion or leaks
- The anode and relief valve on storage units
- The flue and ventilation on internal installations
We protect floors and work areas during the job and clean up before we leave. It is the attention to detail our family has held to since 1946.
Plumbing emergencies are stressful, and it is natural to be unsure what to do. These are the mistakes we see most often.
Common Challenges With Bosch Hot Water Repairs (And How We Solve Them)
Urgent Breakdowns Outside Normal Hours
A Bosch unit that fails at 10 pm in winter is more than an inconvenience. We give immediate safety advice over the phone, especially for gas concerns, and attend as soon as we can. If a complex repair can’t be finished overnight, we work to get basic hot water running until the full repair is done.
Older Properties With Ageing Pipework
Sometimes the Bosch unit is fine and the plumbing around it is the problem. Corroded or narrow pipes, or undersized gas lines, can keep water flow or gas supply below what a continuous flow unit needs. We assess the whole hot water line, not just the unit, and recommend staged upgrades where needed.
Balancing Budget, Timing and Tenant Needs for Landlords
Rental repairs mean coordinating access, communicating with tenants and keeping downtime short. We give landlords and property managers clear findings and options so decisions can be made quickly, along with documentation for their records.
What Customers Say About Our Hot Water Repairs
Matt M.
"Quick and efficient with great workmanship."
Lisa N.
"Northway are so easy to deal with and Craig got our hot water back to hot easily."
Chris X.
"They diagnosed the issue quickly, completed quality repairs, cleaned up perfectly, and emailed the compliance certificate and photos the same day."
Emily W.
"Incredibly professional, so easy to chat with and is easy to identify the root of the problem & fix it."
Convenience: Same-Day Service, 24/7 Emergencies, All Adelaide Suburbs
We service all suburbs of Adelaide, from the CBD to the hills and the coast. We offer same-day service, and our 24/7 emergency service covers gas concerns, no hot water and electrical faults.
Next Steps
Whether it is a Bosch unit that clicks but won’t light, a suspected gas issue, an error code or a noise that wasn’t there last month, we can find the cause and fix it.
- Call Northway Plumbing, Aircon & Electrical on (08) 7282 0809 for urgent Bosch repairs or a booked visit.
- Have the details handy: the Bosch model from the label on the unit, its rough age and the symptoms.
- Arrange access to the unit for our licensed technician.
FAQs about Bosch Hot Water Repairs in Adelaide
Can you repair any Bosch hot water system, even if you did not install it?
Yes. We repair Bosch hot water systems regardless of who installed them or when. That includes HydroPower and pilot ignition continuous flow units, older electronic models such as the Optiflow and Highflow, and Bosch electric and heat pump systems. If parts for an older model are hard to source, we will tell you up front and explain the practical options before any work begins.Why does my Bosch continuous flow unit click but not light?
A Bosch unit that clicks without lighting usually has an ignition, gas supply or water flow problem. On HydroPower models, low water flow is a common cause, because the unit uses that flow to create its spark. Blocked shower heads, clogged aerators and narrow old pipework can all reduce flow. A weak pilot, faulty flame sensor or low gas pressure can also be responsible. We test each one on site.How quickly can you attend a Bosch hot water breakdown in Adelaide?
We offer same-day service for Bosch hot water repairs across Adelaide, and 24/7 emergency service for gas concerns, a complete loss of hot water or electrical faults. Exact timing depends on your location and the day’s bookings, but households without hot water and anyone with a safety concern are prioritised. Let us know the model and symptoms when you call so we can prepare.What will my Bosch hot water repair cost?
The cost depends on the fault and the parts required, so we diagnose first rather than guessing over the phone. Once we know what is wrong, we give you a fixed price up front, before any work begins, and nothing changes without your approval. A seniors discount on standard pricing is available for eligible customers, so please mention it when you book your visit.Do you guarantee your Bosch hot water repair work?
Yes. Every Bosch repair we carry out is backed by our lifetime guarantee on workmanship, which covers the quality of our labour. If something goes wrong with the work we did, we come back and put it right. All work is done under our Plumber, Electrical & Gas Fitting Licence PGE 327229, and we explain exactly what was repaired so you have a clear record.
