Hot Water Systems Adelaide

Maintenance, strata units
"As efficient and helpful as always! We have been loyal customers for over 20 years."
Trevor G. Erindale
Maintenance, strata units
Installations, gas hot water
"Grant replaced our Rheem gas hot water heater and took the initiative to make pipework improvements."
Andy H. Adelaide metro
Installations, gas hot water
Insurance inspection and leak repair
"Even though fully booked found the time to repair the leak to prevent further water damage."
Jason N. Adelaide metro
Insurance inspection and leak repair
Repairs, drain unblocking
"Spent enough time making sure the whole drain was clean and not just the blockage site."
John C. Adelaide metro
Repairs, drain unblocking
Maintenance, property management
"Super reliable, professional, and always going the extra mile to keep our landlords and tenants happy."
Lachlan T. Adelaide metro
Maintenance, property management
Installations, commercial fit-out
"Prompt, professional and friendly service... fitting out my warehouse/workshop and toilet block."
Sean M. Adelaide metro
Installations, commercial fit-out

Why Choose Northway

1946

Four Generations Since 1946

Northway has looked after Adelaide homes and businesses since 1946. Today, siblings Brett, Grant and Stacey Calladine carry on the family legacy: respect, trust and doing the job properly.

02

Same-Day Service

Most plumbing problems can’t wait, so we offer same-day service across Greater Adelaide. We turn up when we say we will, explain what we find and fix it properly.

03

Fixed Price, Up Front

You’ll know the price before we start, so there are no surprises on the invoice. Finance is available if you need it, and seniors get a discount on our standard pricing.

04

Lifetime Workmanship Guarantee

Every job is backed by a lifetime guarantee on our workmanship. That’s how a family business earns nearly 80 years of trust: no shortcuts, no compromises, and we stand behind our work.

05

24/7

24 Hour Emergency Service

Burst pipe, gas leak or no hot water? Our 24-hour emergency service covers Greater Adelaide. Our plumbers stay calm, make things safe and get you back up and running.

06

Licensed, Accredited and Trusted

We’re fully licensed for plumbing, gas fitting and electrical work (PGE 327229) and have been Master Plumbers SA members for 75 years. Councils, real estate agents and insurers trust us with their properties.

Wall-mounted outdoor gas water heater with pipes and valves on a brick wall.

The Right New Hot Water System for Your Adelaide Property, Sized and Installed Properly

Northway Plumbing, Aircon & Electrical supplies and installs new hot water systems across Adelaide, including electric, gas storage, continuous flow, solar and heat pump units. As a family business since 1946, we size each system to your household or business, install it to South Australian requirements, and back the work with fixed prices up front and a lifetime guarantee on workmanship.


A new hot water system is a decision you live with every day for many years. Get it right and you barely think about it again. Get it wrong and you are reminded each morning by a shower that runs cold, a power bill that keeps climbing, or a tank wedged into a side path where nobody can service it. That is why we treat choosing hot water systems in Adelaide as a conversation, not a catalogue order.

What We Help With

Northway Plumbing, Aircon & Electrical supplies and installs:

  • Electric storage and instantaneous hot water systems
  • Gas storage hot water systems
  • Continuous gas hot water units
  • Solar hot water with gas or electric boosting
  • Heat pump hot water systems
  • Like-for-like replacements and system-type changeovers
  • Relocations during renovations and extensions
  • Hot water for rental properties, strata complexes and small businesses

Hot Water Systems

Choosing a new hot water system? We’ll compare gas, electric, heat pump and solar options, explain SA’s rules and any available rebates, then install it with a Certificate of Compliance.

White boiler with copper pipes mounted on a brick wall, with a small control box beside it.

Continuous Gas Hot Water

Enjoy endless hot water on demand. Our licensed plumbers and gas fitters install and repair energy-efficient continuous flow gas systems across Adelaide, including Rinnai, Rheem, Bosch, Dux and Chromagen units.

Water heater unit beside a brick house wall, with pipes and a hose on a paved patio.

Electric Hot Water

Electric storage and instantaneous hot water installed, repaired and replaced across Adelaide. We check whether SA rules allow electric in your home and set it up for cheaper off-peak power.

Outdoor HVAC equipment under a building, with a white unit, red fan, and tall silver tank on gravel.

Heat Pumps

Heat pumps heat water using energy from the air. Adelaide’s STC Zone 3 rebates and REPS offers can cut the upfront cost, and our licensed plumbers install and service them.

Solar hot water heater on a roof with a storage tank and dark solar panels.

Solar Hot Water

Make the most of Adelaide sunshine with solar hot water. We install, service and repair solar-electric and solar-gas systems, including valves, anodes and boosters, and help claim available STC rebates.

Northway has looked after Adelaide homes and businesses since 1946. Today, siblings Brett, Grant and Stacey Calladine carry on the family legacy: respect, trust and doing the job properly.

06

Rheem has supplied Australian homes since 1939. Our licensed Adelaide plumbers repair Rheem electric and gas storage, gas continuous flow, solar and AmbiPower heat pump systems, fixing leaks and trips.

Licensed, Accredited and Trusted

06

Licensed, Accredited and Trusted

Our licensed Adelaide plumbers service and repair Rinnai Infinity gas and Efinity electric continuous flow units, heat pumps, solar systems and storage tanks, including regular relief valve and anode checks.

Licensed, Accredited and Trusted

06

German-engineered Stiebel Eltron instantaneous and compact water heaters deliver hot water on demand. Our licensed Adelaide electricians and plumbers repair single and three-phase units, under-sink boilers and compact storage heaters.

06

Licensed, Accredited and Trusted

Made by Rheem, Vulcan electric and gas storage water heaters use high-strength steel, with spare parts available. Our licensed Adelaide plumbers diagnose and repair leaking, tripping or cold Vulcan systems.

Stiebel Eltron

STIEBEL ELTRON logo in bold black text on a white background with a red line beneath

German-engineered Stiebel Eltron instantaneous and compact water heaters deliver hot water on demand. Our licensed Adelaide electricians and plumbers repair single and three-phase units, under-sink boilers and compact storage heaters.

Commercial

Burst pipe, blocked sewer or overflowing toilet in the middle of the night? Our licensed Adelaide plumbers respond 24/7, find the fault fast and certify every job with the regulator.

Residential

Emergencies

Our licensed backflow plumbers install, test and commission backflow devices for Adelaide homes, businesses and growers, matching each to its hazard rating and reporting to the regulator within seven days.

Trade waste, grease arrestors and backflow protection for Adelaide businesses. Our commercial plumbers keep sites from Edinburgh Parks to Northern Adelaide Plains growers compliant with SA Water and regulator requirements.

Backflow Prevention

From leaking taps, toilets and showers, our licensed plumbers look after Adelaide homes, with every job certified to the Technical Regulator and covered by SA’s 10-year defective work warranty.

The City of Mitcham has trusted Northway with public projects including toilet facilities at CC Hood Reserve and Hillview Reserve, the Hawthorn Community Centre kitchen, and recent pipe relining at the Mitcham Civic Centre.

Trusted by Local Councils

Meet Brett and Grant Calladine, Owners of Northway

Brett and Grant Calladine are the fourth generation of the Northway family. Their great-grandfather, Ernest John Northway, started the business in Adelaide in 1946. Today, the two brothers run it as Directors, with their sister Stacey managing the office. Brett leads the business as General Manager, and in 2019 he was named Certified Trade Professional of the Year at the Master Builders SA Building Excellence Awards. Grant runs day-to-day operations and is often the one who comes out to quote, making sure every job is done properly from start to finish.


Together, they lead a team of experienced licensed plumbers and apprentices, keeping alive the family values Ern started with: respect, trust and honest workmanship. When you call Northway, you’re dealing with a family business that has stood behind its work for nearly 80 years.

Accreditations & Licences

We hold the licences and industry accreditations that matter for Plumbing, Electrical and Air Conditioning in Adelaide, so every job we do is fully compliant and backed by recognised industry bodies.

White checkmark on a black rounded square icon.
White checkmark in a black rounded square icon
White checkmark inside a black rounded square icon
White checkmark in a black rounded square icon
White checkmark in a black rounded square icon

Awards, Recognition and Media

For nearly 80 years, Northway has built its reputation one job at a time. Along the way, our team and our work have been recognised by South Australia’s leading industry bodies, local councils and the customers we look after every day.

Certified Trade Professional of the Year

Director Brett Calladine was named Certified Trade Professional of the Year at the 2019 Master Builders SA Building Excellence Awards. The award recognises the highest standards of skill, professionalism and workmanship in South Australian trades.

Master Plumbers SA Member of the Month

Northway was named Member of the Month by Master Plumbers SA and featured in a two-page spread in the association’s newsletter. In it, Gill, Brett and Grant shared their insights on the plumbing industry.

75 Years with Master Plumbers SA

In 2025, Grant and Brett received a commemorative certificate at the Master Plumbers SA President’s Luncheon, marking 75 years of membership. Northway is one of the association’s longest-standing member businesses.

Trusted by Local Councils

The City of Mitcham has trusted Northway with public projects including toilet facilities at CC Hood Reserve and Hillview Reserve, the Hawthorn Community Centre kitchen, and recent pipe relining at the Mitcham Civic Centre.

Two workers kneel beside a manhole, handling cables and a red hose near a gray machine outdoors.

Workmanship Guarantees & Product Warranties

Every job Northway completes comes with a lifetime guarantee on our workmanship. If something we’ve done isn’t right, we’ll come back and fix it. We combine old-school service values with modern techniques and cutting-edge equipment, from thermal imaging leak detection to CCTV drain cameras and pipe relining, so problems are found accurately and fixed properly the first time.


We use quality, approved materials from trusted Australian suppliers, and the hot water systems, tapware, fixtures and parts we install carry their manufacturer’s warranty too. Our family has stood behind its work since 1946, and that hasn’t changed.


No shortcuts. No compromises. Just work you can rely on.

Hot Water System Rules and Regulations in Adelaide

Choosing a new hot water system in Adelaide starts with South Australia’s water heater requirements, in force since July 2008. For most new or replacement installations in houses and apartments, compliant options are limited. You can choose a gas system rated at 5 stars or more, or a solar or electric heat pump system that earns the required number of small-scale technology certificates (STCs). Gas-boosted solar systems up to 700 litres also qualify. A 3-star gas unit is accepted only where it sits in a fully enclosed roof space, room or attached garage of an established home. The system must be installed by a licensed plumber to AS/NZS 3500.4 and the Plumbing Code of Australia (NCC Volume Three). An electronic Certificate of Compliance goes to you and the Office of the Technical Regulator within seven days. Upgrading to an efficient system can also attract discounts through the state’s Retailer Energy Productivity Scheme (REPS) under activity WH1. From 1 January 2026, an eligible heat pump must earn at least 13 STCs. Ask your plumber to confirm in writing that your chosen system complies at your address.

Hot Water System Facts in Adelaide

SA’s rules narrow the choice. Low-emission options in SA include solar-electric and heat pump systems that meet a minimum STC count, gas continuous-flow units rated 5 stars or more, and solar-gas units up to 700 L. Electric storage up to 250 L is allowed only in some cases, depending on the building and whether mains gas is available.

System size changes the rule. In 2025, heat pump and solar systems in Zone 3 needed at least 22 STCs for 400–700 L, 16 for 220–400 L and 10 for under 220 L. A unit that meets the Zone 3 or Zone 4 figure can be installed anywhere in SA.

More than half of homes have solar. An estimated 54.4% of SA houses have rooftop solar, including 60.2% in Salisbury and 56.7% in Playford. That makes daytime water heating from your own panels a real option.

Free power is now on offer.From 1 July 2026, the default market offer includes a Solar Sharer option with free electricity from 12pm to 3pm. A timer can schedule an electric or heat pump system into that window.

Gas use per home has halved. Average gas use per SA residential connection fell from 25 GJ in 2002 to 14 GJ in 2025.

The discount shrinks each year. STCs for solar and heat pump water heaters are based on a deeming period of 5 years for 2026 installs. It drops by one year each year until the scheme ends in 2030.

Retailer incentives favour non-gas homes. Under REPS, a heat pump earns 113 normalised GJ in a home without mains gas, but only 33 in a home with it. Offers are usually more generous for all-electric homes.

Adelaide Hot Water Systems Local Snapshot

What to weigh up when choosing a system in Adelaide.

Rooftop solar

54.4%

Share of SA houses, to Dec 2025

Salisbury solar uptake

60.2%

Share of dwellings, to Dec 2025

Solar Sharer free window

12pm–3pm

Default market offer from 1 Jul 2026

STC deeming period

5 years

2026 installs, falling to 1 year by 2030

Average gas use

14 GJ

Per SA home, 2025 (25 GJ in 2002)

Electric storage cap

250 L

Where electric is allowed, SA rules

Beige gas water heater standing against a wall in a utility area, with labels and vents visible.

Hot Water System Cost in Adelaide

A new hot water system in Adelaide typically costs $735 to $6,450+ supplied and installed, depending on the type. Electric storage systems are the cheapest at $735 to $2,750+ installed, followed by gas storage at $1,100 to $3,200+ and continuous flow gas at $1,375 to $3,200+. Heat pumps typically cost $2,750 to $5,500+ before rebates, and solar systems $3,200 to $6,450+. Removing and disposing of the old unit typically adds $70 to $185+. If you need a like-for-like replacement the same day, it usually costs $1,200 to $3,700+. The right system depends on your household size, whether you have gas connected, your roof space and how much you want to spend on running costs over the life of the unit. Northway recommends a system matched to how your household actually uses hot water, then quotes a fixed installed price that includes removing the old unit.

Understanding Hot Water Systems in Adelaide

A hot water system heats water and delivers it safely to your taps, showers and appliances. Every system has a heating method (electric element, gas burner, heat pump compressor or solar collector), a delivery method (storage tank or continuous flow), insulation, and safety devices such as tempering and relief valves. Northway Plumbing, Aircon & Electrical treats all of these as one system, because the best unit in the world will disappoint if it is the wrong size, in the wrong spot, or connected to the wrong supply.


Adelaide’s Mediterranean climate suits a wide range of hot water systems, but local factors narrow the field. Mains water across much of the city carries minerals that form scale in tanks and on elements. Heritage bungalows, post-war brick homes and new infill townhouses each bring different space limits and service connections. Every installation must be carried out by a licensed tradesperson, and ours are completed under Plumber, Electrical & Gas Fitting Licence PGE 327229.

Key Types of Hot Water Systems Used in Adelaide

Adelaide properties use five main types of hot water system, and each suits different space, energy and budget situations:


  • Electric storage: an insulated tank heated by one or two elements. Lowest-fuss to install, suits homes without gas, and can often run on an off-peak tariff. Read more about electric hot water systems.
  • Gas storage: a tank heated by a gas burner, with fast recovery for busy households already connected to natural gas.
  • Continuous flow (gas): a compact wall-mounted unit that heats water only as it is used, so there is no tank to run dry. Suits townhouses, units and investment properties. See continuous hot water systems.
  • Solar: roof collectors heat water stored in a tank, with a gas or electric booster for cloudy days. See solar hot water.
  • Heat pump: draws warmth from the outside air to heat water using much less electricity than a standard element. See heat pump hot water.


Real Adelaide examples help. An older bungalow in the western suburbs may have an ageing electric tank on the side wall. A new townhouse in the inner south may have almost no yard space. A café in the CBD may need steady, high-volume hot water through a lunch rush. Each points to a different answer.

Water heater unit beside a brick house wall, with pipes and a hose on a paved patio.
Wall-mounted white gas water heater with black pipes on a brick exterior wall.

How Adelaide Conditions Influence System Choice

Adelaide’s climate, water and building styles all shape which hot water system will perform best. Winter inlet water is much colder than summer water, so every system works harder in the cooler months. Heat pumps lose a little efficiency on cold mornings, and solar output drops on short, cloudy days, leaning more on the booster.


Mineral-rich water speeds up scale on elements, inside heat exchangers and around valves, which affects tank lining, anode and maintenance choices. Building style matters as well. Heritage areas may restrict visible changes, small side yards limit where a tank or heat pump can sit, roof orientation and shading decide whether solar will work, and strata rules may control where equipment goes and how much noise is acceptable. Existing gas, electrical capacity and rooftop solar panels also steer the choice.

Choosing the Right Hot Water System for Your Adelaide Property

Choosing a new hot water system in Adelaide comes down to four levers: household size, energy source, property constraints and total cost of ownership. Northway Plumbing, Aircon & Electrical helps you weigh them up on site, then gives you a fixed price up front for the option you choose.

Matching System Capacity to Household or Business Size

The right capacity depends on how many people use hot water, when they use it and how many outlets run at once. Bathrooms, laundry use, dishwashers and back-to-back morning showers all count.


  • Storage systems are sized by how much heated water the tank holds and how quickly it recovers after heavy use. A couple and a family of five need very different tanks.
  • Continuous flow systems are sized by flow rate, meaning how much hot water they can deliver at once when two showers and a kitchen tap are running.
  • Small businesses such as salons and cafés may need a larger system, or more than one unit, to handle busy periods.


Undersizing means cold showers and unhappy tenants. Oversizing means paying to keep water hot that nobody uses. Both are common and both are avoidable. We count fixtures, ask about routines and look at the site before recommending a size, because an on-site visit catches things a phone call cannot.

Fuel Source and Existing Services

Your existing gas, electrical supply and outdoor space shape which new system is practical. Staying with the same energy source usually keeps installation simple. Changing energy source may mean gas line work, a new electrical circuit or rerouted pipework.


Typical Adelaide scenarios play out like this:



  • Older homes in Prospect or Unley often have an external gas or electric tank that has been in place for many years. A like-for-like replacement keeps things straightforward.
  • Inner-suburban renovations sometimes move the system to free up yard space, which can add pipework and possibly a change of energy source.
  • Investment properties usually favour a proven, easy-to-operate system with minimal downtime between tenants.


Before you commit to a system type, let us inspect what is already there. Our licensed gas fitters and electricians can confirm what each option would need.

Balancing Upfront Cost, Running Cost and Longevity

Every hot water system type has a different balance of purchase cost, running cost and expected life. Electric storage is usually the simplest to install but can cost more to run unless paired with an off-peak tariff or rooftop solar. Gas suits homes already connected. Heat pumps and solar cost more up front but are designed to use less energy over their lifetime.


Factors that affect long-term value in Adelaide include:



  • Your electricity and gas tariffs, and when you use hot water
  • Local water conditions and the maintenance a system will need
  • Parts and service support for the brand you choose


Your plans for the property matter too. A landlord selling in a couple of years may prioritise a lower upfront cost, while a family planning to stay for the long haul often benefits from a system with lower running costs. We talk through these trade-offs honestly and give you a fixed price for each option you are considering.

Step-by-Step Installation Process

01

Phone consultation on(08) 7282 0809. We ask about your current system, the property and what is prompting the change.

02

On-site inspection. We check gas and electrical capacity, available space, access and any strata or heritage limits.

03

Recommendation and fixed price. We present suitable options with fixed prices up front before any work begins.

04

Removal of the old unit. We isolate and remove the old system and prepare the site.

05

Installation. We fit the new system with all valves, pipework, gas or electrical connections and safety devices, including a tempering valve to control bathroom outlet temperature.

06

Commissioning and testing. We check temperature and flow at your taps and confirm every safety device works.

07

Clean-up and handover. We explain how to use and care for the system and hand over the manufacturer’s documentation.

If your old system has already failed, we offer same-day service where possible and a 24/7 emergency service for no hot water or a dangerous leak.

Common Hot Water System Challenges in Adelaide (and How We Solve Them)

These are the situations that most often lead Adelaide customers to ask us about a new system. Recognising them helps you decide when replacement makes more sense than another repair.

System Too Small or Running Out of Hot Water

A household grows, a bathroom is added, or a business brings in a commercial dishwasher, and the old system cannot keep up. Northway assesses actual use, checks the existing capacity and recommends a correctly sized new system. In many Adelaide homes, a change of size or technology at replacement time ends years of frustration in a single job.

Aging or Rusted Tanks in Older Adelaide Homes

Storage tanks in long-held Adelaide homes corrode over time, especially where mineral-rich water has worked on the lining and anode for many years. Warning signs include rusty water, dampness at the base, falling temperature and safety devices that keep tripping. We start with a safety check and give you honest advice. When replacement is the right call, we plan a clean changeover and aim to remove the old unit and install the new one in a single visit.

Frequent Breakdowns and Rising Energy Bills

Repeated faults or a steady climb in energy bills often mean a system is nearing the end of its useful life. Patch repairs can keep it going, but each call-out adds up and the inefficiency remains. A new, more efficient system such as a heat pump or solar unit may be the better long-term choice, and we compare the options openly so you can choose what suits your budget and plans.

Hot Water System Reviews From Adelaide Customers

Mike S.

Five black stars in a row, indicating a rating or score.

"I had my old gravity fed hot water unit in the roof space replaced with a new electric hot water unit... my experience with Northway from day 1 when Grant came out to quote to day of completion everything went smoothly."

Seng Guan L.

Five black stars in a row, indicating a rating or score.

"Job well done by Brett today on the installation of the new hot water system in my place."

Jim W.

Five black stars in a row, indicating a rating or score.

"Starting from the beginning at providing a quote, to answering questions relating to the quote and then arranging time to do the installation and following up with explanations about the appliance, they have achieved 5 out of 5 performance."

Founds M.

Five black stars in a row, indicating a rating or score.

"There is no way I can fault this company. Yesterday I had the pleasure of meeting Peter just wonderful young man that did everything and cleaned up."

New Hot Water Systems Installed Across Adelaide

We service all suburbs of Adelaide. The right new system can look very different from one street to the next: a replacement tank on a narrow side path in Norwood, a compact wall-mounted unit for a Mawson Lakes townhouse, a solar setup on a north-facing roof in Golden Grove, or a heat pump for an all-electric home in Seaford. Whether you are in the eastern suburbs, the beachside west, the northern growth corridor, the south or the Adelaide Hills around Stirling and Mount Barker, we know the local conditions your new system will face.

Next Steps

Choosing the right hot water system in Adelaide means matching type and capacity to your property and the way you use hot water, then having it installed properly by a licensed team. Energy source, household size, local water and total cost of ownership are the factors that matter most.


Here are your next steps:

  1. Note your current system type, its location and any recurring problems.
  2. Think about how your household or business uses hot water across a typical day.
  3. Call Northway Plumbing, Aircon & Electrical on (08) 7282 0809 or contact us to book an on-site assessment.
  4. Choose your new system with our help, backed by fixed prices up front and a lifetime guarantee on workmanship.

If your current system has already failed, our 24/7 emergency service can help restore hot water as quickly as possible.

FAQs about Hot Water Systems in Adelaide

  • Which type of hot water system is best for an Adelaide home?

    There is no single best type. Gas continuous flow suits homes with a gas connection and limited space. Electric storage suits all-electric homes and simple replacements. Heat pumps and solar suit owners who want lower energy use over time and have suitable outdoor or roof space. Northway Plumbing, Aircon & Electrical assesses your energy supply, space and hot water use on site before recommending a system.
  • What size hot water system do I need?

    The right size depends on how many people live or work at the property, how many bathrooms and appliances use hot water, and how many outlets run at the same time. Storage systems are sized by tank volume and recovery, while continuous flow units are sized by flow rate. We count fixtures and ask about routines on site so the system is neither too small nor wastefully large.
  • Can I switch from gas to a heat pump or electric system?

    Yes, many Adelaide homes switch energy source when replacing a hot water system. A changeover may involve safely capping the gas line, adding or upgrading an electrical circuit, and adjusting pipework. Because Northway holds a combined plumbing, electrical and gas fitting licence (PGE 327229), we can handle every part of the changeover ourselves and give you one fixed price up front.
  • Where is the best place to install a new hot water system?

    The best location balances safety, compliance, access for future servicing, noise and distance to the bathrooms and kitchen. Common Adelaide spots include external walls, side paths and dedicated service areas. Heat pumps need good airflow and should sit away from bedroom windows where possible. We recommend a position during the site visit and explain why.
  • How long does a new hot water system installation take?

    A straightforward like-for-like replacement is often completed in a single visit. Upgrades that change the system type, move its location or need new gas or electrical work can take longer, and we explain the timing before work starts. We plan every installation to keep the time without hot water as short as possible, which matters for families, tenants and businesses.