Rainwater Tank Installation Adelaide

Maintenance, strata units
"As efficient and helpful as always! We have been loyal customers for over 20 years."
Trevor G. Erindale
Maintenance, strata units
Installations, gas hot water
"Grant replaced our Rheem gas hot water heater and took the initiative to make pipework improvements."
Andy H. Adelaide metro
Installations, gas hot water
Insurance inspection and leak repair
"Even though fully booked found the time to repair the leak to prevent further water damage."
Jason N. Adelaide metro
Insurance inspection and leak repair
Repairs, drain unblocking
"Spent enough time making sure the whole drain was clean and not just the blockage site."
John C. Adelaide metro
Repairs, drain unblocking
Maintenance, property management
"Super reliable, professional, and always going the extra mile to keep our landlords and tenants happy."
Lachlan T. Adelaide metro
Maintenance, property management
Installations, commercial fit-out
"Prompt, professional and friendly service... fitting out my warehouse/workshop and toilet block."
Sean M. Adelaide metro
Installations, commercial fit-out

Why Choose Northway

1946

Four Generations Since 1946

Northway has looked after Adelaide homes and businesses since 1946. Today, siblings Brett, Grant and Stacey Calladine carry on the family legacy: respect, trust and doing the job properly.

02

Same-Day Service

Most plumbing problems can’t wait, so we offer same-day service across Greater Adelaide. We turn up when we say we will, explain what we find and fix it properly.

03

Fixed Price, Up Front

You’ll know the price before we start, so there are no surprises on the invoice. Finance is available if you need it, and seniors get a discount on our standard pricing.

04

Lifetime Workmanship Guarantee

Every job is backed by a lifetime guarantee on our workmanship. That’s how a family business earns nearly 80 years of trust: no shortcuts, no compromises, and we stand behind our work.

05

24/7

24 Hour Emergency Service

Burst pipe, gas leak or no hot water? Our 24-hour emergency service covers Greater Adelaide. Our plumbers stay calm, make things safe and get you back up and running.

06

Licensed, Accredited and Trusted

We’re fully licensed for plumbing, gas fitting and electrical work (PGE 327229) and have been Master Plumbers SA members for 75 years. Councils, real estate agents and insurers trust us with their properties.

Water tank with pump and piping beside a large gray corrugated silo outdoors

Rainwater Tanks for Adelaide Properties, Installed, Plumbed and Connected Properly the First Time

Northway Plumbing, Aircon & Electrical provides rainwater tank installation in Adelaide for homes, rental properties and businesses. Our licensed plumbers handle site assessment, base preparation, pump installation, overflow routing and connections to garden taps, toilets and laundries, with compliance paperwork provided. We are a family business since 1946, offering fixed prices up front and a lifetime guarantee on workmanship across all suburbs of Adelaide.


A rainwater tank is one of the most practical additions you can make to an Adelaide property. Done well, it keeps the garden going through summer and takes some of the load off your mains water. Done poorly, it leans, leaks, hums all night and dumps overflow against your footings. Our family has been plumbing Adelaide properties since 1946.

What We Help With

Our rainwater tank installation service in Adelaide covers:

  • Site assessment for space, ground conditions, access and roof catchment
  • Tank bases of compacted crushed rock or concrete, arranged or coordinated
  • Pumps and controls, sized to the fixtures you want to supply
  • Connections to garden taps, irrigation, toilets and laundry cold water
  • Mains changeover devices so you never run out of water
  • Screens and first-flush diverters to protect water quality
  • Overflow routing away from footings and boundaries
  • Repairs to leaning tanks, failed pumps and poorly routed overflows
  • Water supply protection with backflow prevention where a tank connects to household plumbing

Northway has looked after Adelaide homes and businesses since 1946. Today, siblings Brett, Grant and Stacey Calladine carry on the family legacy: respect, trust and doing the job properly.

06

Rheem has supplied Australian homes since 1939. Our licensed Adelaide plumbers repair Rheem electric and gas storage, gas continuous flow, solar and AmbiPower heat pump systems, fixing leaks and trips.

Licensed, Accredited and Trusted

06

Licensed, Accredited and Trusted

Our licensed Adelaide plumbers service and repair Rinnai Infinity gas and Efinity electric continuous flow units, heat pumps, solar systems and storage tanks, including regular relief valve and anode checks.

Licensed, Accredited and Trusted

06

German-engineered Stiebel Eltron instantaneous and compact water heaters deliver hot water on demand. Our licensed Adelaide electricians and plumbers repair single and three-phase units, under-sink boilers and compact storage heaters.

06

Licensed, Accredited and Trusted

Made by Rheem, Vulcan electric and gas storage water heaters use high-strength steel, with spare parts available. Our licensed Adelaide plumbers diagnose and repair leaking, tripping or cold Vulcan systems.

Stiebel Eltron

STIEBEL ELTRON logo in bold black text on a white background with a red line beneath

German-engineered Stiebel Eltron instantaneous and compact water heaters deliver hot water on demand. Our licensed Adelaide electricians and plumbers repair single and three-phase units, under-sink boilers and compact storage heaters.

Commercial

Burst pipe, blocked sewer or overflowing toilet in the middle of the night? Our licensed Adelaide plumbers respond 24/7, find the fault fast and certify every job with the regulator.

Residential

Emergencies

Our licensed backflow plumbers install, test and commission backflow devices for Adelaide homes, businesses and growers, matching each to its hazard rating and reporting to the regulator within seven days.

Trade waste, grease arrestors and backflow protection for Adelaide businesses. Our commercial plumbers keep sites from Edinburgh Parks to Northern Adelaide Plains growers compliant with SA Water and regulator requirements.

Backflow Prevention

From leaking taps, toilets and showers, our licensed plumbers look after Adelaide homes, with every job certified to the Technical Regulator and covered by SA’s 10-year defective work warranty.

The City of Mitcham has trusted Northway with public projects including toilet facilities at CC Hood Reserve and Hillview Reserve, the Hawthorn Community Centre kitchen, and recent pipe relining at the Mitcham Civic Centre.

Trusted by Local Councils

Meet Brett and Grant Calladine, Owners of Northway

Brett and Grant Calladine are the fourth generation of the Northway family. Their great-grandfather, Ernest John Northway, started the business in Adelaide in 1946. Today, the two brothers run it as Directors, with their sister Stacey managing the office. Brett leads the business as General Manager, and in 2019 he was named Certified Trade Professional of the Year at the Master Builders SA Building Excellence Awards. Grant runs day-to-day operations and is often the one who comes out to quote, making sure every job is done properly from start to finish.


Together, they lead a team of experienced licensed plumbers and apprentices, keeping alive the family values Ern started with: respect, trust and honest workmanship. When you call Northway, you’re dealing with a family business that has stood behind its work for nearly 80 years.

Accreditations & Licences

We hold the licences and industry accreditations that matter for Plumbing, Electrical and Air Conditioning in Adelaide, so every job we do is fully compliant and backed by recognised industry bodies.

White checkmark on a black rounded square icon.
White checkmark in a black rounded square icon
White checkmark inside a black rounded square icon
White checkmark in a black rounded square icon
White checkmark in a black rounded square icon

Awards, Recognition and Media

For nearly 80 years, Northway has built its reputation one job at a time. Along the way, our team and our work have been recognised by South Australia’s leading industry bodies, local councils and the customers we look after every day.

Certified Trade Professional of the Year

Director Brett Calladine was named Certified Trade Professional of the Year at the 2019 Master Builders SA Building Excellence Awards. The award recognises the highest standards of skill, professionalism and workmanship in South Australian trades.

Master Plumbers SA Member of the Month

Northway was named Member of the Month by Master Plumbers SA and featured in a two-page spread in the association’s newsletter. In it, Gill, Brett and Grant shared their insights on the plumbing industry.

75 Years with Master Plumbers SA

In 2025, Grant and Brett received a commemorative certificate at the Master Plumbers SA President’s Luncheon, marking 75 years of membership. Northway is one of the association’s longest-standing member businesses.

Trusted by Local Councils

The City of Mitcham has trusted Northway with public projects including toilet facilities at CC Hood Reserve and Hillview Reserve, the Hawthorn Community Centre kitchen, and recent pipe relining at the Mitcham Civic Centre.

Two workers kneel beside a manhole, handling cables and a red hose near a gray machine outdoors.

Workmanship Guarantees & Product Warranties

Every job Northway completes comes with a lifetime guarantee on our workmanship. If something we’ve done isn’t right, we’ll come back and fix it. We combine old-school service values with modern techniques and cutting-edge equipment, from thermal imaging leak detection to CCTV drain cameras and pipe relining, so problems are found accurately and fixed properly the first time.


We use quality, approved materials from trusted Australian suppliers, and the hot water systems, tapware, fixtures and parts we install carry their manufacturer’s warranty too. Our family has stood behind its work since 1946, and that hasn’t changed.


No shortcuts. No compromises. Just work you can rely on.

Rainwater Tank Installation Rules and Regulations in Adelaide

South Australia is one of the few places where a rainwater tank can be compulsory. Under the state’s SA H9 variation to the National Construction Code, new homes and some extensions must collect water from at least 50 m² of roof. It must go into a tank of at least 1,000 litres, plumbed to a toilet, a water heater or all cold-water laundry outlets. A


ny plumbing that connects the tank to the house must be done by a plumber registered with Consumer and Business Services. It must meet the Plumbing Code of Australia (NCC Volume Three) and AS/NZS 3500.1, including backflow protection between tank water and SA Water’s mains supply. Plumbed connections need an electronic Certificate of Compliance to you and the Office of the Technical Regulator within seven days. Most tanks on existing homes don’t need development approval. The City of Onkaparinga, for example, only requires lodgement through PlanSA for tanks over 10 m² and 4 m high, including the stand. Check your own council’s rules before ordering a large tank, and make sure the inlet and overflow have mosquito-proof screens.

Rainwater Tank Facts in Adelaide

Tanks have been compulsory on new homes since 2006. Since 1 July 2006, new SA homes have needed a rainwater tank of at least 1 kL, collecting from at least 50 m² of roof. It must be installed before the house is occupied.

It has to be plumbed in. The tank must be connected to a toilet, the water heater or all cold-water laundry outlets. A garden tap alone doesn’t meet the rule. The plumber must issue a Certificate of Compliance within 7 days.

Big extensions count too. The same rules apply to extensions of more than 50 m², not just new homes.

Northern Adelaide is building fast.Riverlea is planned for 12,000 homes and Concordia for 10,000–12,000. Every new home needs a compliant, plumbed-in tank.

Most of the rain falls in winter. Kent Town averages 547.1 mm a year, with June (78.1 mm), July (75.3 mm) and August (67.7 mm) the wettest months. A tank fills in winter and carries the household through summer.

Mains supply is under pressure. Adelaide’s reservoirs fell to 40% in January 2025, the lowest in more than 25 years. City rainfall in 2025 was just 80% of average.

Some councils offer rebates. City of Holdfast Bay, for example, offers 50% of a tank’s cost up to $150 while funds last. Check your own council.

Adelaide Rainwater Tank Local Snapshot

The rules and rainfall behind rainwater tanks in Adelaide.

Minimum tank size

1 kL

New homes since 1 July 2006

Minimum roof catchment

50 m²

SA requirement

Annual rainfall

547.1 mm

Kent Town average

Wettest month

June, 78.1 mm

Kent Town average

Reservoir low point

40%

January 2025, lowest in 25+ years

Planned homes at Riverlea

12,000

Northern Adelaide growth area

Yellow excavator unloading debris into a truck at a construction site near a house and woodpile.

Rainwater Tank Installation Cost in Adelaide

Installing a rainwater tank in Adelaide typically costs $800 to $2,500+ for the plumbing, on top of the price of the tank. Simple garden-only setups sit at the lower end. A tank plumbed into the house with a pressure pump and automatic mains changeover usually costs $1,800 to $3,500+, plus the tank, which ranges from a few hundred dollars for a small slimline model to several thousand for a large steel or poly unit.


Groundworks, a concrete pad and how far the tank is from the downpipes all affect the final price. In South Australia, new homes and some larger extensions must have an additional water supply, usually a plumbed tank of at least one kilolitre connected to a toilet, the water heater or the laundry cold water outlets. Northway installs tanks to these requirements and issues the required certificate of compliance.

Understanding Rainwater Tank Systems in Adelaide

A rainwater tank system is much more than a tank in the yard. It includes the tank, a stable base, inlet screening, a first-flush diverter, a pump and pressure control, pipework to taps or fixtures, and an overflow that carries excess water safely away from the house. Every part has to work together.


Adelaide’s climate shapes the design. Most of our rain falls in the cooler months, so a tank fills over winter and has to carry you through long, dry summers. Many Adelaide suburbs also sit on reactive clay soils that swell when wet and shrink when dry, so where your overflow goes matters as much as how much the tank holds.


All plumbing for our tank installations is carried out by licensed plumbers under Licence PGE 327229.

Main components of a rainwater tank installation

  • Tank: polyethylene, steel or concrete, chosen to suit your site, space and budget.
  • Base: a firm, level base is essential. Every litre of water weighs about a kilogram, so a full tank places a heavy load on the ground. A compacted crushed rock pad or concrete slab stops settling and movement.
  • Screens and first-flush device: mosquito-proof mesh on inlets and overflows keeps insects out, and a first-flush diverter sends the dirtiest first runoff from the roof away from the tank.
  • Pump and pressure control: a garden-only system needs less pressure than one supplying toilets and the laundry. We size the pump to your actual use.
  • Pipework: connections from the tank and pump to outdoor taps, irrigation or internal fixtures.
  • Overflow: pipework that carries excess water to a suitable discharge point, away from your footings and your neighbour’s fence.



Where your existing gutters and taps are in good condition, we can connect a new tank to them.

Worker lifting a large concrete utility box into an excavation site with a crane on a truck
Worker on a scaffold handling a white pipe against a red brick building
Three smiling coworkers in black polos standing against a white wall

How rainwater tanks are typically used in Adelaide homes and businesses

Most Adelaide customers install a rainwater tank for garden watering and toilet flushing, and many also connect the laundry cold water. Common uses include:


  • Gardens and lawns through summer
  • Topping up pools
  • Toilet flushing
  • Laundry cold water
  • Washdown areas for small businesses
  • Irrigation for courtyards, planter boxes and sheds



How you plan to use the water decides the tank size, pump and plumbing layout. A garden-only setup is straightforward. Connecting to fixtures inside the house needs extra pipework, a changeover device and protection for the mains supply.

Major Leaks Under Sinks, Basins and Appliances

Roof, Gutter and Storm-Related Plumbing Emergencies

Flexible hoses under kitchen sinks and vanities, dishwasher connections and basin wastes are common failure points, and they can fail without warning. A leak that starts overnight or while you are away can swell cupboard bases and damage flooring.


When you call, we can talk you through closing the isolation valve or turning off the appliance. We then replace the failed hoses, valves or pipework and check for other hidden leaks.

Heavy Adelaide downpours test gutters, downpipes and stormwater drainage. Blocked downpipes, overflowing gutters and failed flashings can send water through ceilings and into insulation.


In a storm, we focus on making things safe: clearing blocked downpipes and drains and restoring drainage flow. Once conditions allow, follow-up repairs can be arranged through our leaking roof repairs and blocked stormwater drain teams.

Choosing the Right Rainwater Tank for Your Adelaide Property

Once you know how you want to use the water, choosing the tank becomes a practical exercise. Northway does not manufacture tanks. We work with the tank you choose and give honest advice on what will suit your property, your space and your water needs.

Tank shapes and configurations

Round tanks suit properties with open space, such as larger backyards, wide side yards and rural-style blocks. They give good strength for the material used and are a cost-effective way to store more water. Round tanks are common in suburbs like Modbury, Para Hills and Glenelg where there is room.


Slimline tanks solve the narrow side passage problem. In inner suburbs like Prospect, Norwood, Unley and West Croydon, the gap between house and fence can be tight. Slimline tanks run along the fence line without blocking access and come in colours to suit fences and walls.


Under-deck and modular tanks work where even a slimline will not fit. Several smaller tanks can be linked together to act as one supply, which suits townhouses, units and properties where a large tank cannot get through the gate.


On street-facing properties, tanks can be tucked along fences, behind sheds or worked into landscaping to keep them out of sight.

Tank materials and suitability for Adelaide conditions

Polyethylene tanks are the most common choice for Adelaide homes. They are made from food-grade, UV-stabilised material, resist corrosion from salt air near the coast and are light enough to get through tight access.


Steel tanks offer a clean look and a range of colours to match your home or fence. Near the coast, in suburbs like Brighton and Semaphore, salt air is worth considering when choosing steel. Connections between steel tanks and brass or copper fittings need compatible transition fittings to avoid corrosion.


Concrete tanks are heavy, durable and can be partly or fully buried. They suit larger properties where underground installation is practical, but their weight rules them out for raised positions.


Whatever material you choose, we make sure the fittings, valves and pipework are compatible with it, so connections do not corrode or leak.

Tank sizing for Adelaide rainfall and household demand

Sizing comes down to four things: your roof catchment area, local rainfall, the number of people using the water, and which fixtures the tank will supply. Properties up in the hills face suburbs usually catch more rain than those on the plains, and a larger roof fills a tank faster.


Three situations we see regularly:


A small courtyard home near the CBD fringe. Limited side space and a small roof. A compact slimline tank feeding an outdoor tap for pots and a small lawn.


A family home in Tea Tree Gully or Marion. A good-sized roof and room down the side. A larger tank supplying the garden, toilets and possibly the laundry, with a changeover device for mains backup and a pump strong enough for every connected fixture.


A larger property or light commercial site around Golden Grove. Several tanks linked together for irrigation, washdown and toilets. Access and terrain need planning, and leaf screening matters where trees overhang the roof.


Bigger is not always better. If space, access or budget are limited, we help you find the right balance.

07

Plumbing and pump installation. We fit screens, outlet pipework, the pump, valves and connections to your taps and fixtures, to Australian Standards.

Phone discussion. We ask about your property, any existing tank or gutters, and how you want to use the water.

04

01

Base preparation. We arrange or coordinate a compacted crushed rock or concrete base. On Adelaide’s clay soils, a good base prevents settling.

Our Rainwater Tank Installation Process

Step-by-step installation overview

01

Phone discussion. We ask about your property, any existing tank or gutters, and how you want to use the water.

02

Site visit. We check space, ground conditions, access for delivery, existing plumbing, roof catchment and nearby services or structures.

03

Design and fixed price. We recommend the tank position, base, connection points and overflow route, and give you a fixed price before any work starts.

04

Base preparation. We arrange or coordinate a compacted crushed rock or concrete base. On Adelaide’s clay soils, a good base prevents settling.

05

Delivery coordination. We work with you and your tank supplier on delivery time, access and placement.

06

Handover. We show you how the valves, pump and controls work and explain simple maintenance: checking screens, flushing sediment and keeping an eye on the base.

07

Plumbing and pump installation. We fit screens, outlet pipework, the pump, valves and connections to your taps and fixtures, to Australian Standards.

08

Testing and commissioning. We flush the lines, test pump pressure, check every joint and confirm switches, pressure controls and changeover devices work.

Common Rainwater Tank Issues in Adelaide and How We Fix Them

Many of our tank call-outs are for existing systems that were poorly installed or have aged. Most can be fixed without replacing the whole system.

Poor tank base and movement

A tank leaning toward the fence, stretched fittings, cracked pipework or water pooling at the base usually points to a base that was not built or compacted properly, often on reactive clay.


We re-level or rebuild the base with compacted material or a concrete slab suited to a full tank, realign the connections, replace stressed fittings and redirect the overflow away from footings and paving.

Overflows and downpipes causing localised flooding

An overflow that discharges next to the house, garage or a neighbour’s boundary lets water pool where it can cause trouble, especially on clay soils. It is one of the most common problems we find on older installations.


We reroute overflow pipework to a suitable discharge point or the existing stormwater system and check the screens stay clear. If your stormwater drains are struggling too, our blocked stormwater drain team can help, and gutter or downpipe problems are handled by our roof plumbing team.

Pump problems and low pressure

Typical pump problems include the pump switching on and off rapidly, noisy running, not starting at all and uneven pressure at taps or toilets. Causes range from electrical faults and pump wear to air leaks in suction lines and blocked filters.


We find the actual cause before recommending anything. Because Northway is also licensed for electrical work, we can check the pump’s power supply as well as the plumbing. If the pump is too small for the fixtures it serves, we recommend a correctly sized replacement.

Water quality concerns

Discoloured water in the toilet cistern, stale smells and mosquitoes around the tank usually mean a problem with screening, first-flush diversion or the tank seal. Pipework where water sits still can also go stale.


We install or upgrade inlet screens, first-flush diverters and lids, and adjust pipework so water does not sit in dead ends. We install tank systems for non-drinking uses such as gardens, toilets and laundries. If you are considering using tank water for drinking, it is worth getting health advice first and committing to regular maintenance of the whole system.

What Customers Say About Our Rainwater and Roof Plumbing Work

Giocondo C.

Five black stars in a row, indicating a rating or score.

"I have just finished a brief consultation from your Professor Eden who detailed my concerns advising the required necessary method to effectively stop the rain water not necessary required to extra fill out the tank... Was wonderful."

Simon B.

Five black stars in a row, indicating a rating or score.

"We have used Northway Plumbing for 16+ years and they have always provided quality work in replacing gutters, pipework and kitchen and bathroom fixtures. They provide value for money work in a friendly but professional manner."

Brenda B.

Five black stars in a row, indicating a rating or score.

"Polite, pleasant young man came to clear the gutters. Showed me before and after photos. He did the job well and efficiently."

Richard D.

Five black stars in a row, indicating a rating or score.

"Thanks, Craig for the neat and efficient work on the downpipe, garden tap riser, and kitchen taps. Highly recommend."

Areas we service

We service all suburbs of Adelaide, from the coast across the plains to the foothills. Same-day service is available for urgent problems such as a failed pump or a leaking connection, where our schedule allows.

Next Steps

A well-planned rainwater tank installation in Adelaide keeps your garden going through dry summers and reduces the mains water your property uses. Having it installed by a licensed, experienced local plumber means it is safe, compliant and built to last, and Northway backs every installation with a lifetime guarantee on workmanship.

  1. Walk around your property and measure possible spots along fences, behind sheds or under decks.
  2. Decide what you want the tank to supply: the garden only, the garden and toilets, or more.
  3. Gather any building plans or plumbing information you have.
  4. Check with your council if you are unsure about approvals, or ask us at the site visit.
  5. Call Northway Plumbing, Aircon & Electrical on (08) 7282 0809 or send an enquiry to arrange a site visit and fixed price.

FAQs about Rainwater Tank Installation in Adelaide

  • Do I need council approval to install a rainwater tank in Adelaide?

    Many domestic rainwater tanks can be installed without formal development approval, but larger or taller tanks, or tanks in prominent positions, may need council consent. The rules vary between councils and depend on the tank and its location. Check with your local council, or ask Northway during the site visit and we will point you in the right direction.
  • Can Northway supply the tank as well as install it?

    Northway focuses on professional installation and plumbing. We can coordinate with your chosen tank supplier and advise on what to look for, including material, inlet and outlet positions and suitability for your site. Many customers choose their preferred tank, then engage us for the base, pump, connections and compliance.
  • How long does a rainwater tank installation take?

    Most installations are completed on site in a day once the base is ready and the tank has been delivered. Connecting several fixtures inside the house, or altering existing plumbing, can take longer. Access, scope and weather all play a part, and we confirm the expected timing when we give you a fixed price.
  • Can you connect my tank to my existing garden taps or irrigation?

    Usually, yes. We can connect a tank to existing garden taps or install new dedicated outdoor taps, and we can work with irrigation specialists on drip or sprinkler systems. Connections to toilets, laundries or hot water are completed to current plumbing standards by our licensed plumbers under Licence PGE 327229.
  • What areas of Adelaide do you service for rainwater tanks?

    We service all suburbs of Adelaide, including coastal, inner, northern, southern and foothills suburbs. Whether you are in Semaphore, Burnside, Salisbury or Morphett Vale, our team can visit, assess your site and give you a fixed price up front. Call (08) 7282 0809 to arrange a visit.