"As efficient and helpful as always! We have been loyal customers for over 20 years."
"Grant replaced our Rheem gas hot water heater and took the initiative to make pipework improvements."
"Even though fully booked found the time to repair the leak to prevent further water damage."
"Spent enough time making sure the whole drain was clean and not just the blockage site."
"Super reliable, professional, and always going the extra mile to keep our landlords and tenants happy."
"Prompt, professional and friendly service... fitting out my warehouse/workshop and toilet block."
Why Choose Northway
1946
Four Generations Since 1946
Northway has looked after Adelaide homes and businesses since 1946. Today, siblings Brett, Grant and Stacey Calladine carry on the family legacy: respect, trust and doing the job properly.
02
Same-Day Service
Most plumbing problems can’t wait, so we offer same-day service across Greater Adelaide. We turn up when we say we will, explain what we find and fix it properly.
03
Fixed Price, Up Front
You’ll know the price before we start, so there are no surprises on the invoice. Finance is available if you need it, and seniors get a discount on our standard pricing.
04
Lifetime Workmanship Guarantee
Every job is backed by a lifetime guarantee on our workmanship. That’s how a family business earns nearly 80 years of trust: no shortcuts, no compromises, and we stand behind our work.
05
24/7
24 Hour Emergency Service
Burst pipe, gas leak or no hot water? Our 24-hour emergency service covers Greater Adelaide. Our plumbers stay calm, make things safe and get you back up and running.
06
Licensed, Accredited and Trusted
We’re fully licensed for plumbing, gas fitting and electrical work (PGE 327229) and have been Master Plumbers SA members for 75 years. Councils, real estate agents and insurers trust us with their properties.

Rheem Electric, Gas, Continuous Flow, Solar and Heat Pump Faults Fixed Across Adelaide
Northway Plumbing, Aircon & Electrical provides Rheem hot water repairs in Adelaide for electric storage, gas storage, continuous flow, solar and heat pump systems. We are a proudly South Australian family business, here since 1946 and now in our fourth generation. We offer same-day service, fixed prices up front and 24/7 emergency service. We service all suburbs of Adelaide. Call (08) 7282 0809.
Rheem makes one of the broadest hot water ranges in Australia, so a Rheem fault can look very different from one house to the next. In a 1960s brick home in Prospect it might be an electric storage tank that no longer heats overnight. In a newer family home in Golden Grove it is more likely a gas continuous flow unit that cuts out mid-shower. On a north-facing roof in the hills it could be a solar booster that has quietly stopped doing its job.
Our job is to work out which of those you are dealing with, explain it clearly and fix it properly. Every Rheem repair is carried out under our Plumber, Electrical & Gas Fitting Licence PGE 327229, so one visit covers the plumbing, the gas and the electrical side of the unit.
What We Help With
Our Rheem hot water repairs in Adelaide include:
- No hot water, or hot water running out early
- Leaking relief valves, joints and connections
- Element, thermostat and anode replacement on electric storage units
- Pilot, thermocouple and gas valve faults on gas storage units, including the Stellar
- Ignition and flow faults on Rheem continuous flow units
- Booster, sensor and circulation faults on Rheem solar systems
- Fan, sensor and control faults on Rheem heat pumps, including the AmbiHeat
- Tempering valve replacement and temperature problems
- Routine servicing for homes, rentals and businesses
Northway has looked after Adelaide homes and businesses since 1946. Today, siblings Brett, Grant and Stacey Calladine carry on the family legacy: respect, trust and doing the job properly.
06
Rheem has supplied Australian homes since 1939. Our licensed Adelaide plumbers repair Rheem electric and gas storage, gas continuous flow, solar and AmbiPower heat pump systems, fixing leaks and trips.
Licensed, Accredited and Trusted
06
Licensed, Accredited and Trusted
Our licensed Adelaide plumbers service and repair Rinnai Infinity gas and Efinity electric continuous flow units, heat pumps, solar systems and storage tanks, including regular relief valve and anode checks.
Licensed, Accredited and Trusted
06
German-engineered Stiebel Eltron instantaneous and compact water heaters deliver hot water on demand. Our licensed Adelaide electricians and plumbers repair single and three-phase units, under-sink boilers and compact storage heaters.
06
Licensed, Accredited and Trusted
Made by Rheem, Vulcan electric and gas storage water heaters use high-strength steel, with spare parts available. Our licensed Adelaide plumbers diagnose and repair leaking, tripping or cold Vulcan systems.
Stiebel Eltron
German-engineered Stiebel Eltron instantaneous and compact water heaters deliver hot water on demand. Our licensed Adelaide electricians and plumbers repair single and three-phase units, under-sink boilers and compact storage heaters.
Commercial
Burst pipe, blocked sewer or overflowing toilet in the middle of the night? Our licensed Adelaide plumbers respond 24/7, find the fault fast and certify every job with the regulator.
Residential
Emergencies
Our licensed backflow plumbers install, test and commission backflow devices for Adelaide homes, businesses and growers, matching each to its hazard rating and reporting to the regulator within seven days.
Trade waste, grease arrestors and backflow protection for Adelaide businesses. Our commercial plumbers keep sites from Edinburgh Parks to Northern Adelaide Plains growers compliant with SA Water and regulator requirements.
Backflow Prevention
From leaking taps, toilets and showers, our licensed plumbers look after Adelaide homes, with every job certified to the Technical Regulator and covered by SA’s 10-year defective work warranty.
The City of Mitcham has trusted Northway with public projects including toilet facilities at CC Hood Reserve and Hillview Reserve, the Hawthorn Community Centre kitchen, and recent pipe relining at the Mitcham Civic Centre.
Trusted by Local Councils
Meet Brett and Grant Calladine, Owners of Northway
Brett and Grant Calladine are the fourth generation of the Northway family. Their great-grandfather, Ernest John Northway, started the business in Adelaide in 1946. Today, the two brothers run it as Directors, with their sister Stacey managing the office. Brett leads the business as General Manager, and in 2019 he was named Certified Trade Professional of the Year at the Master Builders SA Building Excellence Awards. Grant runs day-to-day operations and is often the one who comes out to quote, making sure every job is done properly from start to finish.
Together, they lead a team of experienced licensed plumbers and apprentices, keeping alive the family values Ern started with: respect, trust and honest workmanship. When you call Northway, you’re dealing with a family business that has stood behind its work for nearly 80 years.
Accreditations & Licences
We hold the licences and industry accreditations that matter for Plumbing, Electrical and Air Conditioning in Adelaide, so every job we do is fully compliant and backed by recognised industry bodies.
Awards, Recognition and Media
For nearly 80 years, Northway has built its reputation one job at a time. Along the way, our team and our work have been recognised by South Australia’s leading industry bodies, local councils and the customers we look after every day.
Certified Trade Professional of the Year
Director Brett Calladine was named Certified Trade Professional of the Year at the 2019 Master Builders SA Building Excellence Awards. The award recognises the highest standards of skill, professionalism and workmanship in South Australian trades.
Master Plumbers SA Member of the Month
Northway was named Member of the Month by Master Plumbers SA and featured in a two-page spread in the association’s newsletter. In it, Gill, Brett and Grant shared their insights on the plumbing industry.
75 Years with Master Plumbers SA
In 2025, Grant and Brett received a commemorative certificate at the Master Plumbers SA President’s Luncheon, marking 75 years of membership. Northway is one of the association’s longest-standing member businesses.
Trusted by Local Councils
The City of Mitcham has trusted Northway with public projects including toilet facilities at CC Hood Reserve and Hillview Reserve, the Hawthorn Community Centre kitchen, and recent pipe relining at the Mitcham Civic Centre.

Workmanship Guarantees & Product Warranties
Every job Northway completes comes with a lifetime guarantee on our workmanship. If something we’ve done isn’t right, we’ll come back and fix it. We combine old-school service values with modern techniques and cutting-edge equipment, from thermal imaging leak detection to CCTV drain cameras and pipe relining, so problems are found accurately and fixed properly the first time.
We use quality, approved materials from trusted Australian suppliers, and the hot water systems, tapware, fixtures and parts we install carry their manufacturer’s warranty too. Our family has stood behind its work since 1946, and that hasn’t changed.
No shortcuts. No compromises. Just work you can rely on.
Rheem Hot Water Repair Rules and Regulations in Adelaide
Rheem makes gas, electric, solar and heat pump systems, so the rules for a repair in Adelaide depend on your model. Common jobs such as replacing a pressure and temperature relief valve or a tempering valve are plumbing work. They must be done by a plumber registered with Consumer and Business Services and meet AS/NZS 3500.4, the heated water standard, under the Plumbing Code of Australia (NCC Volume Three). Tempering valves matter because new installations generally limit bathroom hot water to 50°C to reduce scalding risk.
Certifiable work needs an electronic Certificate of Compliance to you and the Office of the Technical Regulator within seven days. Gas burners and controls need a registered gas fitter working to AS/NZS 5601.1:2022. Electric elements need a licensed electrician and testing to AS/NZS 3000. A repair or warranty replacement doesn’t trigger South Australia’s water heater efficiency rules. A new heater must generally be low-emission under rules in place since July 2008. Ask your plumber to check the relief valve drain and tempering valve setting while they’re on site, and keep the paperwork for your insurer.
Rheem Facts
- Incorporated in Melbourne in 1936, built its first Australian water heater in 1939, and owned by Paloma since 2001.
- The 491 series 125 L electric has a 12-year cylinder and 1-year parts and labour warranty.

Rheem Hot Water Repairs Cost in Adelaide
Rheem hot water repairs in Adelaide generally cost $150 to $550+. Rheem has one of the largest installed bases in Adelaide, covering electric, gas storage, continuous flow, solar and heat pump models. On storage systems, the most common repairs are new elements and thermostats, pilot assemblies, and pressure relief or tempering valves.
Rheem continuous flow units more often need igniter, flow sensor or circuit board repairs, which sit towards the higher end of the range. If you have an older Rheem tank that is leaking from the base, it has usually reached the end of its life. A like-for-like replacement typically costs $1,200 to $3,700+, depending on the type. Northway diagnoses the fault, tells you whether the repair is worth doing for the age of your system and gives you a fixed price before we start.
Understanding Rheem Hot Water Repairs in Adelaide
A Rheem hot water repair is any work that returns an existing Rheem system to safe, steady operation after it has stopped heating, started leaking or developed a fault. The aim is to keep a sound unit running for as long as it sensibly can, rather than replacing it at the first sign of trouble.
Adelaide conditions shape how Rheem units wear. Mineral content in the water supply builds up on elements, valves and heat exchangers over time. Much of our older housing stock has hot water units tucked into small laundries and side passages. And the city has a genuine mix of natural gas, off-peak electric and solar installations, which means the person repairing your Rheem needs to be comfortable with all of them.
What Counts as a Rheem Hot Water Repair?
Most Rheem repairs fall into a handful of categories:
- Replacing a failed part such as a heating element, thermostat, igniter, gas control valve, sacrificial anode, circulation pump, sensor or tempering valve
- Fixing leaks at relief valves, pipe joints and tank connections where the cylinder itself is still sound
- Recommissioning a unit after a power outage or gas supply interruption
- Correcting earlier installation work that is causing ongoing faults
Gas and electrical work on a hot water unit must be done by a licensed tradesperson. Our licence covers plumbing, gas fitting and electrical work, so we can handle every part of a Rheem repair ourselves rather than calling in a second trade.


Types of Rheem Systems We Commonly Repair in Adelaide
Different Rheem technologies fail in different ways, so knowing your system type helps us prepare before we arrive:
- Rheem electric storage units. Common in older homes and units across the inner and western suburbs. Many heat on an off-peak tariff overnight, so a fault that starts in the evening often isn’t noticed until the morning showers run cold. Elements, thermostats and anodes are the usual suspects.
- Rheem gas storage units, including the Stellar. The Stellar is a gas storage model with a stainless steel cylinder. Gas storage faults tend to involve the pilot, thermocouple, burner or gas control valve.
- Rheem gas continuous flow units. Wall-mounted units that heat water on demand. Ignition, flow sensing and scale inside the heat exchanger are the most common repair areas.
- Rheem solar systems. Roof collectors paired with a gas or electric booster. Booster circuits, sensors and circulation faults can reduce performance long before anyone notices a cold shower.
- Rheem heat pump units, including the AmbiHeat. These move heat from the air into the water. Fans, sensors, control boards and airflow around the unit all affect how well they run.
We work on both current Rheem models and units that have been sitting in a laundry cupboard for decades.
Roof, Gutter and Storm-Related Plumbing Emergencies
Heavy Adelaide downpours test gutters, downpipes and stormwater drainage. Blocked downpipes, overflowing gutters and failed flashings can send water through ceilings and into insulation.
In a storm, we focus on making things safe: clearing blocked downpipes and drains and restoring drainage flow. Once conditions allow, follow-up repairs can be arranged through our leaking roof repairs and blocked stormwater drain teams.
Common Rheem Hot Water Problems in Adelaide
Most Rheem faults give warning signs before a complete breakdown. Acting on those early signs is usually the difference between a simple part replacement and a cold week waiting for a new unit.
No Hot Water or Water Suddenly Goes Cold
This is the call we take most often. Typical Rheem scenarios include:
- An off-peak electric storage tank that hasn’t heated overnight
- A gas continuous flow unit that shuts down partway through a shower
- A Rheem tank that now runs out of hot water much earlier than it used to
Common causes are a failed element or thermostat, a tripped circuit, an ignition fault, a gas supply problem or a failed sensor. Scale from Adelaide’s water can shorten the working life of elements and thermostats.
Two safe checks before you call: make sure the isolator switch at the unit is on and look for a tripped breaker at the switchboard. For gas units, check the gas isolation valve is open. If there is still no hot water, leave it there and call us.
Leaking Rheem Hot Water System
A little water from the temperature and pressure relief valve during heating can be normal. A steady flow from that valve, rusty water around the base of the tank, or drips at pipe joints all need attention.
A leak at a valve or joint is usually repairable. A storage cylinder that has corroded through is not, and that points towards replacement. We will show you where the water is coming from and explain what it means before any decisions are made.
Lukewarm, Inconsistent or Fluctuating Temperatures
Showers that cool off quickly, long waits at distant taps or temperature swings usually trace back to:
- A tempering valve or thermostat that is no longer controlling the delivery temperature properly
- Scale or sediment inside the cylinder or heat exchanger
- Sensor or circulation problems on Rheem solar and heat pump systems
Temperature problems are a comfort issue and a safety issue, especially in homes with young children or older residents, so they are worth fixing rather than living with.
Rheem Error Codes, Pilot Light and Power Issues
Many newer Rheem units show fault codes on a controller or through flashing lights. Other classic signs are a gas storage pilot that won’t stay lit, often a thermocouple or gas valve issue, and a unit that trips the household power, which can point to a failed element, a wiring fault or water getting where it shouldn’t.
If you see a code, write it down along with the model number from the compliance plate. Passing those details on when you call (08) 7282 0809 helps us work out the likely cause before we arrive.
How Our Rheem Hot Water Repair Service Works
Our process is the same whether it is a planned weekday visit or a leak late at night: listen first, diagnose properly, agree the price, then do the work.
Step-by-Step Rheem Repair Process With Northway
01
You call us. Stacey and the office team will ask about the symptoms, the type and age of your Rheem system and where you are, so we can plan the visit.
02
We confirm attendance. We offer same-day service, and 24/7 emergency service for serious faults such as major leaks, gas concerns or no hot water at all.
03
We diagnose on site. Our licensed technician inspects the unit, carries out safety checks and explains what has failed in plain English.
04
You receive a fixed price up front. You know the cost before any work starts.
05
We repair, test and tidy up. Once the work is done we test the system at the taps and leave the area as we found it.
06
We explain what was done. You will get a clear invoice and practical advice on keeping your Rheem running well. Our work is backed by a lifetime guarantee on workmanship.
What You Can Safely Do Before We Arrive
- Turn off the isolator at the unit, or the gas supply valve, if you notice a major leak, a burning smell or a gas odour
- Close the cold water isolation valve to the heater if water is escaping
- Move belongings away from wet areas
- Take photos of the leak, the compliance plate or any error code
Please don’t open the combustion chamber, touch the wiring or try to replace valves yourself. Those jobs belong with a licensed professional.
Plumbing emergencies are stressful, and it is natural to be unsure what to do. These are the mistakes we see most often.
Common Rheem Repair Challenges and How We Solve Them
Older Rheem Units in Tight or Awkward Locations
Many Adelaide homes built in the post-war decades have hot water units squeezed into narrow laundries, under stairs or into small courtyards. We plan these jobs carefully, protect floors and walls, and talk you through any access issues before we start.
After-Hours Breakdowns and Emergency Leaks
Hot water rarely fails at a convenient time. Our 24/7 emergency service means a calm, licensed tradesperson on the other end of the phone, with safety first and hot water restored as soon as it can be done properly. For a broader after-hours problem, our 24/7 emergency plumber team can help too.
Balancing Short-Term Fixes and Long-Term Value
Sometimes the cheapest fix is the right one. Sometimes it just delays the next breakdown. We lay out the options and likely outcomes so owners, landlords and property managers can make an informed choice. Our lifetime guarantee on workmanship means we have every reason to do the job properly the first time.
Rheem Hot Water Reviews From Adelaide Customers
Andy H.
"Friendly and professional, highly recommended! Grant replaced our Rheem gas hot water heater and took the initiative to make pipework improvements and explain the benefits."
Sharm E.
"Craig was fantastic and actually listened to me and repaired my hot water service."
Matt M.
"Quick and efficient with great workmanship."
Derek B.
"The last callout was to replace a leaking gas hot water heater. The price was a good average but the work was superb."
Rheem Hot Water Repairs Across Adelaide
We service all suburbs of Adelaide. That includes the northern suburbs around Salisbury, Golden Grove and Gawler, the eastern suburbs and foothills from Norwood to Burnside, the west and coast from Henley Beach to Glenelg, and the south through Marion and Morphett Vale out towards the Fleurieu edge. Whether your Rheem unit is in a CBD apartment, a character home in Unley or a new estate on the city fringe, we can attend.
Next Steps
When your Rheem stops behaving, the most useful thing you can do is note what it is doing and give us a call. Here is the simple path:
- Note the Rheem model number from the compliance plate, the symptom and any error code.
- If there is a leak, a burning smell or a gas odour, make the area safe using the steps above.
- Call Northway Plumbing, Aircon & Electrical on (08) 7282 0809 for same-day or 24/7 emergency help.
- If your system hasn’t been checked in years, ask us about a maintenance visit.
FAQs about Rheem Hot Water Repairs in Adelaide
How quickly can you repair my Rheem hot water system in Adelaide?
We offer same-day service across Adelaide for Rheem repairs, and 24/7 emergency service for serious leaks, gas concerns or a complete loss of hot water. How long the repair takes depends on the fault and the parts needed. If you can give us the model number and symptoms when you call, we can plan the visit so that, wherever possible, the job is finished in one trip.Do you service all Rheem models and ages?
Yes. We repair Rheem electric storage, gas storage, continuous flow, solar and heat pump systems, from current models to units that have been in service for many years. If a unit is beyond a sensible repair, perhaps because the cylinder has failed or parts are no longer available, we will tell you honestly and explain your options rather than doing a temporary patch that won’t last.What usually causes an off-peak Rheem electric tank to stop heating?
An off-peak Rheem electric tank that stops heating usually has a failed element, a faulty thermostat, a tripped circuit or a problem with the off-peak supply itself. Because these tanks heat overnight, the fault often shows up as cold water first thing in the morning. Check your switchboard and the isolator at the unit first. If both are on, our licensed electricians and plumbers can test the element and thermostat on site.How much do Rheem hot water repairs in Adelaide cost?
The cost depends on the system type, the fault and the parts required, so we don’t quote blind over the phone. What we do offer is a fixed price up front, after diagnosis and before any work begins. You decide with the full cost in front of you, with no surprises on the invoice. A seniors discount on standard pricing is available, so please mention it when you book.Can I do my own Rheem hot water repairs?
No. Gas and electrical work on hot water units must be done by a licensed tradesperson, both for your safety and to keep the work compliant. You can safely check the isolator switch, the switchboard and the gas valve, but anything inside the unit should be left to a professional. Northway holds Licence PGE 327229 covering plumbing, gas fitting and electrical work.
