"As efficient and helpful as always! We have been loyal customers for over 20 years."
"Grant replaced our Rheem gas hot water heater and took the initiative to make pipework improvements."
"Even though fully booked found the time to repair the leak to prevent further water damage."
"Spent enough time making sure the whole drain was clean and not just the blockage site."
"Super reliable, professional, and always going the extra mile to keep our landlords and tenants happy."
"Prompt, professional and friendly service... fitting out my warehouse/workshop and toilet block."
Why Choose Northway
1946
Four Generations Since 1946
Northway has looked after Adelaide homes and businesses since 1946. Today, siblings Brett, Grant and Stacey Calladine carry on the family legacy: respect, trust and doing the job properly.
02
Same-Day Service
Most plumbing problems can’t wait, so we offer same-day service across Greater Adelaide. We turn up when we say we will, explain what we find and fix it properly.
03
Fixed Price, Up Front
You’ll know the price before we start, so there are no surprises on the invoice. Finance is available if you need it, and seniors get a discount on our standard pricing.
04
Lifetime Workmanship Guarantee
Every job is backed by a lifetime guarantee on our workmanship. That’s how a family business earns nearly 80 years of trust: no shortcuts, no compromises, and we stand behind our work.
05
24/7
24 Hour Emergency Service
Burst pipe, gas leak or no hot water? Our 24-hour emergency service covers Greater Adelaide. Our plumbers stay calm, make things safe and get you back up and running.
06
Licensed, Accredited and Trusted
We’re fully licensed for plumbing, gas fitting and electrical work (PGE 327229) and have been Master Plumbers SA members for 75 years. Councils, real estate agents and insurers trust us with their properties.
Northway Plumbing, Aircon & Electrical supplies and installs new hot water systems across Adelaide, including electric, gas storage, continuous flow, solar and heat pump units. As a family business since 1946, we size each system to your household or business, install it to South Australian requirements, and back the work with fixed prices up front and a lifetime guarantee on workmanship.
A new hot water system is a decision you live with every day for many years. Get it right and you barely think about it again. Get it wrong and you are reminded each morning by a shower that runs cold, a power bill that keeps climbing, or a tank wedged into a side path where nobody can service it. That is why we treat choosing hot water systems in Adelaide as a conversation, not a catalogue order.

Gas, Electric, Solar and Heat Pump Water Heaters Repaired by Licensed Adelaide Technicians
Northway Plumbing, Aircon & Electrical provides hot water repairs across Adelaide for electric, gas, continuous flow, solar and heat pump systems from all major brands. Our licensed team finds the fault, gives you a fixed price up front and repairs it properly, with same-day service, a 24/7 emergency service and a lifetime guarantee on workmanship.
Northway Plumbing, Aircon & Electrical provides hot water repairs across Adelaide for electric, gas, continuous flow, solar and heat pump systems from all major brands. Our licensed team finds the fault, gives you a fixed price up front and repairs it properly, with same-day service, a 24/7 emergency service and a lifetime guarantee on workmanship.
If you have no hot water right now, call (08) 7282 0809. If the unit is leaking, turn off the cold water isolation valve to the heater, switch off the power at the circuit breaker or turn off the gas, and move belongings away from the water. Please do not attempt repairs on gas or electrical components yourself; in South Australia that work must be done by a licensed tradesperson.
What We Help With
Northway Plumbing, Aircon & Electrical repairs every common hot water system and brand in Adelaide:
- System types: gas storage, continuous gas, electric, solar and heat pump
- Parts and faults: thermostats, elements, burners, ignition, relief valves, tempering valves, anodes, leaks and error codes
- Brands we repair:
- Rheem hot water repairs
- Rinnai hot water repairs
- Dux hot water repairs
- Bosch hot water repairs
- Chromagen hot water repairs
- Vulcan hot water repairs
- Stiebel Eltron hot water repairs
- Urgent help: after-hours leaks and failures through our 24/7 emergency plumber service
Northway has looked after Adelaide homes and businesses since 1946. Today, siblings Brett, Grant and Stacey Calladine carry on the family legacy: respect, trust and doing the job properly.
06
Rheem has supplied Australian homes since 1939. Our licensed Adelaide plumbers repair Rheem electric and gas storage, gas continuous flow, solar and AmbiPower heat pump systems, fixing leaks and trips.
Licensed, Accredited and Trusted
06
Licensed, Accredited and Trusted
Our licensed Adelaide plumbers service and repair Rinnai Infinity gas and Efinity electric continuous flow units, heat pumps, solar systems and storage tanks, including regular relief valve and anode checks.
Licensed, Accredited and Trusted
06
German-engineered Stiebel Eltron instantaneous and compact water heaters deliver hot water on demand. Our licensed Adelaide electricians and plumbers repair single and three-phase units, under-sink boilers and compact storage heaters.
06
Licensed, Accredited and Trusted
Made by Rheem, Vulcan electric and gas storage water heaters use high-strength steel, with spare parts available. Our licensed Adelaide plumbers diagnose and repair leaking, tripping or cold Vulcan systems.
The Brands We Install & Repair
Our licensed Adelaide plumbers repair Bosch gas continuous flow systems, including HydroPower, Pilot Ignition and Internal Compact models, plus older Optiflow and Highflow units that still have spare parts support.
From Splitline and Roofline solar systems to Midea heat pumps and gas continuous flow units, our licensed Adelaide plumbers diagnose and repair Chromagen hot water, with clear, honest repair-or-replace advice.
An Australian brand since 1915. Our licensed Adelaide plumbers repair Dux Proflo electric, Prodigy gas, Always Hot continuous flow, and Ecosmart solar and heat pump systems, including valves and anodes.
Rheem has supplied Australian homes since 1939. Our licensed Adelaide plumbers repair Rheem electric and gas storage, gas continuous flow, solar and AmbiPower heat pump systems, fixing leaks and trips.
Our licensed Adelaide plumbers service and repair Rinnai Infinity gas and Efinity electric continuous flow units, heat pumps, solar systems and storage tanks, including regular relief valve and anode checks.
German-engineered Stiebel Eltron instantaneous and compact water heaters deliver hot water on demand. Our licensed Adelaide electricians and plumbers repair single and three-phase units, under-sink boilers and compact storage heaters.
Made by Rheem, Vulcan electric and gas storage water heaters use high-strength steel, with spare parts available. Our licensed Adelaide plumbers diagnose and repair leaking, tripping or cold Vulcan systems.
Northway has looked after Adelaide homes and businesses since 1946. Today, siblings Brett, Grant and Stacey Calladine carry on the family legacy: respect, trust and doing the job properly.
06
Rheem has supplied Australian homes since 1939. Our licensed Adelaide plumbers repair Rheem electric and gas storage, gas continuous flow, solar and AmbiPower heat pump systems, fixing leaks and trips.
Licensed, Accredited and Trusted
06
Licensed, Accredited and Trusted
Our licensed Adelaide plumbers service and repair Rinnai Infinity gas and Efinity electric continuous flow units, heat pumps, solar systems and storage tanks, including regular relief valve and anode checks.
Licensed, Accredited and Trusted
06
German-engineered Stiebel Eltron instantaneous and compact water heaters deliver hot water on demand. Our licensed Adelaide electricians and plumbers repair single and three-phase units, under-sink boilers and compact storage heaters.
06
Licensed, Accredited and Trusted
Made by Rheem, Vulcan electric and gas storage water heaters use high-strength steel, with spare parts available. Our licensed Adelaide plumbers diagnose and repair leaking, tripping or cold Vulcan systems.
Stiebel Eltron
German-engineered Stiebel Eltron instantaneous and compact water heaters deliver hot water on demand. Our licensed Adelaide electricians and plumbers repair single and three-phase units, under-sink boilers and compact storage heaters.
Commercial
Burst pipe, blocked sewer or overflowing toilet in the middle of the night? Our licensed Adelaide plumbers respond 24/7, find the fault fast and certify every job with the regulator.
Residential
Emergencies
Our licensed backflow plumbers install, test and commission backflow devices for Adelaide homes, businesses and growers, matching each to its hazard rating and reporting to the regulator within seven days.
Trade waste, grease arrestors and backflow protection for Adelaide businesses. Our commercial plumbers keep sites from Edinburgh Parks to Northern Adelaide Plains growers compliant with SA Water and regulator requirements.
Backflow Prevention
From leaking taps, toilets and showers, our licensed plumbers look after Adelaide homes, with every job certified to the Technical Regulator and covered by SA’s 10-year defective work warranty.
The City of Mitcham has trusted Northway with public projects including toilet facilities at CC Hood Reserve and Hillview Reserve, the Hawthorn Community Centre kitchen, and recent pipe relining at the Mitcham Civic Centre.
Trusted by Local Councils
Meet Brett and Grant Calladine, Owners of Northway
Brett and Grant Calladine are the fourth generation of the Northway family. Their great-grandfather, Ernest John Northway, started the business in Adelaide in 1946. Today, the two brothers run it as Directors, with their sister Stacey managing the office. Brett leads the business as General Manager, and in 2019 he was named Certified Trade Professional of the Year at the Master Builders SA Building Excellence Awards. Grant runs day-to-day operations and is often the one who comes out to quote, making sure every job is done properly from start to finish.
Together, they lead a team of experienced licensed plumbers and apprentices, keeping alive the family values Ern started with: respect, trust and honest workmanship. When you call Northway, you’re dealing with a family business that has stood behind its work for nearly 80 years.
Accreditations & Licences
We hold the licences and industry accreditations that matter for Plumbing, Electrical and Air Conditioning in Adelaide, so every job we do is fully compliant and backed by recognised industry bodies.
Awards, Recognition and Media
For nearly 80 years, Northway has built its reputation one job at a time. Along the way, our team and our work have been recognised by South Australia’s leading industry bodies, local councils and the customers we look after every day.
Certified Trade Professional of the Year
Director Brett Calladine was named Certified Trade Professional of the Year at the 2019 Master Builders SA Building Excellence Awards. The award recognises the highest standards of skill, professionalism and workmanship in South Australian trades.
Master Plumbers SA Member of the Month
Northway was named Member of the Month by Master Plumbers SA and featured in a two-page spread in the association’s newsletter. In it, Gill, Brett and Grant shared their insights on the plumbing industry.
75 Years with Master Plumbers SA
In 2025, Grant and Brett received a commemorative certificate at the Master Plumbers SA President’s Luncheon, marking 75 years of membership. Northway is one of the association’s longest-standing member businesses.
Trusted by Local Councils
The City of Mitcham has trusted Northway with public projects including toilet facilities at CC Hood Reserve and Hillview Reserve, the Hawthorn Community Centre kitchen, and recent pipe relining at the Mitcham Civic Centre.

Workmanship Guarantees & Product Warranties
Every job Northway completes comes with a lifetime guarantee on our workmanship. If something we’ve done isn’t right, we’ll come back and fix it. We combine old-school service values with modern techniques and cutting-edge equipment, from thermal imaging leak detection to CCTV drain cameras and pipe relining, so problems are found accurately and fixed properly the first time.
We use quality, approved materials from trusted Australian suppliers, and the hot water systems, tapware, fixtures and parts we install carry their manufacturer’s warranty too. Our family has stood behind its work since 1946, and that hasn’t changed.
No shortcuts. No compromises. Just work you can rely on.
Choosing a new hot water system in Adelaide starts with South Australia’s water heater requirements, in force since July 2008. For most new or replacement installations in houses and apartments, compliant options are limited. You can choose a gas system rated at 5 stars or more, or a solar or electric heat pump system that earns the required number of small-scale technology certificates (STCs). Gas-boosted solar systems up to 700 litres also qualify. A 3-star gas unit is accepted only where it sits in a fully enclosed roof space, room or attached garage of an established home. The system must be installed by a licensed plumber to AS/NZS 3500.4 and the Plumbing Code of Australia (NCC Volume Three). An electronic Certificate of Compliance goes to you and the Office of the Technical Regulator within seven days. Upgrading to an efficient system can also attract discounts through the state’s Retailer Energy Productivity Scheme (REPS) under activity WH1. From 1 January 2026, an eligible heat pump must earn at least 13 STCs. Ask your plumber to confirm in writing that your chosen system complies at your address.
Hot Water Repair Rules and Regulations in Adelaide
Repairs are treated differently from replacements under South Australia’s hot water rules. The state’s water heater efficiency requirements specifically exclude repairs, warranty replacements and replacing a single faulty component in an existing solar or heat pump system. So fixing your current unit won’t force an upgrade. Replacing the whole heater will, and must then meet the low-emission rules in place since July 2008. Repairs to valves, elements, thermostats and pipework must still be done by a plumber registered with Consumer and Business Services. Work must meet AS/NZS 3500.4 and the Plumbing Code of Australia (NCC Volume Three). Gas appliance repairs or servicing that don’t modify the appliance from the manufacturer’s specifications don’t need a gas Certificate of Compliance. Altering the gas installation does, under the Gas Act 1997. Electrical faults on electric or heat pump units need a licensed electrician and testing to AS/NZS 3000. Pressure and temperature relief valves and tempering valves are safety devices, so don’t let anyone disable them as a quick fix. Ask your plumber whether repair or replacement makes more sense, and what paperwork you’ll receive either way.
Adelaide’s water affects your tank. Metro Adelaide’s water runs at 150–400 mg/L total dissolved solids. SA Water says hard water (over 200 mg/L) can scale appliances. Dux specifies an aluminium anode where TDS exceeds 600 mg/L.
Hot Water Repair Facts in Adelaide
Valves need regular checks. Rinnai’s manual says to operate the relief valve easing gear at least every six months, inspect the anode at least every 5 years and have the unit serviced every year.
Tempering valves wear out. Dux recommends replacing tempering valves every 5 years. They keep bathroom water at a safe temperature.
Hot enough to be safe, cool enough not to scald. Stored hot water must be kept at 60°C or more, and water delivered to bathrooms is limited to 50°C (45°C in childcare, schools and aged care).
Adelaide’s water affects your tank. Metro Adelaide’s water runs at 150–400 mg/L total dissolved solids. SA Water says hard water (over 200 mg/L) can scale appliances. Dux specifies an aluminium anode where TDS exceeds 600 mg/L.
If it can’t be fixed, SA rules decide the replacement. Since July 2008, most replacement water heaters in SA homes must be low-emission: solar, heat pump or high-efficiency gas, with electric allowed only in some cases.
You can stay on gas. SA’s Energy Minister told Parliament in 2023 there is no requirement to replace gas appliances when changing your water heater.
Simple gas repairs skip the paperwork. Breakdown repairs and maintenance on a gas appliance that don’t modify it are exempt from SA’s gas Certificate of Compliance. Installing a new unit is not.
Adelaide Hot Water Repairs Local Snapshot
The maintenance numbers every Adelaide water heater owner should know.
Relief valve check
Every 6 months
Rinnai manual
Anode inspection
Every 5 years
Rinnai manual
Tempering valve replacement
Every 5 years
Dux recommendation
Storage temperature
60°C or more
Minimum for stored hot water
Bathroom delivery
50°C maximum
45°C in childcare, schools and aged care
Metro water TDS
150–400 mg/L
SA Health
A new hot water system in Adelaide typically costs $735 to $6,450+ supplied and installed, depending on the type. Electric storage systems are the cheapest at $735 to $2,750+ installed, followed by gas storage at $1,100 to $3,200+ and continuous flow gas at $1,375 to $3,200+. Heat pumps typically cost $2,750 to $5,500+ before rebates, and solar systems $3,200 to $6,450+. Removing and disposing of the old unit typically adds $70 to $185+. If you need a like-for-like replacement the same day, it usually costs $1,200 to $3,700+. The right system depends on your household size, whether you have gas connected, your roof space and how much you want to spend on running costs over the life of the unit. Northway recommends a system matched to how your household actually uses hot water, then quotes a fixed installed price that includes removing the old unit.

Hot Water Repairs Cost in Adelaide
Most hot water repairs in Adelaide cost $140 to $460+, with a typical job around $275. Common repairs include replacing a heating element or thermostat, fixing a pilot light, or replacing a pressure relief or tempering valve. Replacing a sacrificial anode, which helps extend a tank’s life, is typically $185 to $460+. If the tank itself is leaking, a repair usually isn’t possible and the system will need replacing. An urgent same-day replacement typically costs $1,200 to $3,700+, depending on the type of system. Adelaide’s water is relatively hard, so mineral scale builds up and wears out components faster than in some other cities, and older systems need more frequent attention. Northway’s vans carry common parts for the major brands, so most repairs are finished on the first visit, at a price you approve before we start.
A hot water system heats water and delivers it safely to your taps, showers and appliances. Every system has a heating method (electric element, gas burner, heat pump compressor or solar collector), a delivery method (storage tank or continuous flow), insulation, and safety devices such as tempering and relief valves. Northway Plumbing, Aircon & Electrical treats all of these as one system, because the best unit in the world will disappoint if it is the wrong size, in the wrong spot, or connected to the wrong supply.
Adelaide’s Mediterranean climate suits a wide range of hot water systems, but local factors narrow the field. Mains water across much of the city carries minerals that form scale in tanks and on elements. Heritage bungalows, post-war brick homes and new infill townhouses each bring different space limits and service connections. Every installation must be carried out by a licensed tradesperson, and ours are completed under Plumber, Electrical & Gas Fitting Licence PGE 327229.
Adelaide properties use five main types of hot water system, and each suits different space, energy and budget situations:
- Electric storage: an insulated tank heated by one or two elements. Lowest-fuss to install, suits homes without gas, and can often run on an off-peak tariff. Read more about electric hot water systems.
- Gas storage: a tank heated by a gas burner, with fast recovery for busy households already connected to natural gas.
- Continuous flow (gas): a compact wall-mounted unit that heats water only as it is used, so there is no tank to run dry. Suits townhouses, units and investment properties. See continuous hot water systems.
- Solar: roof collectors heat water stored in a tank, with a gas or electric booster for cloudy days. See solar hot water.
- Heat pump: draws warmth from the outside air to heat water using much less electricity than a standard element. See heat pump hot water.
Real Adelaide examples help. An older bungalow in the western suburbs may have an ageing electric tank on the side wall. A new townhouse in the inner south may have almost no yard space. A café in the CBD may need steady, high-volume hot water through a lunch rush. Each points to a different answer.
Most Adelaide properties have one of five hot water system types, and each has its own common repair points:
- Gas storage: a tank heated by a gas burner, with a pilot or electronic ignition.
- Gas continuous flow: a wall-mounted unit that heats water as it passes through a heat exchanger.
- Electric storage: a tank with one or two elements and a thermostat.
- Heat pump: a refrigerant circuit and fan that draw heat from the air into a storage tank.
- Solar: roof collectors feeding a storage tank, with a gas or electric booster.
The parts that most often need repair are thermostats, elements and burners, ignition components, temperature and pressure relief valves, tempering valves and sacrificial anodes. Knowing your system type and brand before you call helps us bring the right parts.
Understanding Hot Water Repairs
Hot water repairs means finding the fault in your existing system, replacing or fixing the failed part, and recommissioning the unit so it delivers safe, reliable hot water again. It is not the same as swapping in a new system. A careful diagnosis often brings back a water heater that someone in a hurry might have written off, which is better for your budget and avoids throwing away a unit with life left in it.
Local knowledge matters for hot water repairs in Adelaide. Mains water across much of the city is mineral-rich, so scale builds up on elements, inside heat exchangers and around valves, and sacrificial anodes are used up sooner than in softer-water cities. A plumber who knows these patterns finds the root cause rather than replacing parts until something works. Northway Plumbing, Aircon & Electrical carries out every repair under Plumber, Electrical & Gas Fitting Licence PGE 327229.
How Hot Water Systems Work In A Typical Adelaide Property
Most Adelaide properties have one of five hot water system types, and each has its own common repair points:
- Gas storage: a tank heated by a gas burner, with a pilot or electronic ignition.
- Gas continuous flow: a wall-mounted unit that heats water as it passes through a heat exchanger.
- Electric storage: a tank with one or two elements and a thermostat.
- Heat pump: a refrigerant circuit and fan that draw heat from the air into a storage tank.
- Solar: roof collectors feeding a storage tank, with a gas or electric booster.
The parts that most often need repair are thermostats, elements and burners, ignition components, temperature and pressure relief valves, tempering valves and sacrificial anodes. Knowing your system type and brand before you call helps us bring the right parts.


Adelaide’s climate, water and building styles all shape which hot water system will perform best. Winter inlet water is much colder than summer water, so every system works harder in the cooler months. Heat pumps lose a little efficiency on cold mornings, and solar output drops on short, cloudy days, leaning more on the booster.
Mineral-rich water speeds up scale on elements, inside heat exchangers and around valves, which affects tank lining, anode and maintenance choices. Building style matters as well. Heritage areas may restrict visible changes, small side yards limit where a tank or heat pump can sit, roof orientation and shading decide whether solar will work, and strata rules may control where equipment goes and how much noise is acceptable. Existing gas, electrical capacity and rooftop solar panels also steer the choice.
Six causes account for most hot water repairs we attend in Adelaide:
- Corrosion inside the tank. Once the sacrificial anode is used up, the tank lining starts to corrode, leading to rusty water and eventually a leak.
- Element, burner or thermostat failure. Sediment can make elements burn out, faulty thermostats cause no hot water or uneven temperature, and failed ignition parts stop gas burners lighting.
- Faulty valves. Relief valves can leak with age, high pressure or scale. Tempering valves can fail and deliver water that is too hot or too cold.
- Sediment and scale. Mineral build-up reduces heating efficiency and usable volume and can cause rumbling noises.
- Leaking pipework or fittings. Failed joints and connections around the unit cause water to pool at the base.
- Electrical or gas supply problems. Tripped safety switches, damaged wiring, gas supply interruptions or failed gas valves all leave you without hot water.

Common Causes Of Hot Water Breakdowns In Adelaide
Six causes account for most hot water repairs we attend in Adelaide:
- Corrosion inside the tank. Once the sacrificial anode is used up, the tank lining starts to corrode, leading to rusty water and eventually a leak.
- Element, burner or thermostat failure. Sediment can make elements burn out, faulty thermostats cause no hot water or uneven temperature, and failed ignition parts stop gas burners lighting.
- Faulty valves. Relief valves can leak with age, high pressure or scale. Tempering valves can fail and deliver water that is too hot or too cold.
- Sediment and scale. Mineral build-up reduces heating efficiency and usable volume and can cause rumbling noises.
- Leaking pipework or fittings. Failed joints and connections around the unit cause water to pool at the base.
- Electrical or gas supply problems. Tripped safety switches, damaged wiring, gas supply interruptions or failed gas valves all leave you without hot water.
Major Leaks Under Sinks, Basins and Appliances
Roof, Gutter and Storm-Related Plumbing Emergencies
These are the hot water problems Adelaide homeowners and property managers describe to us most often. Each one is handled with same-day service where possible, fixed prices up front, a lifetime guarantee on workmanship, and a seniors discount on standard pricing.
The right capacity depends on how many people use hot water, when they use it and how many outlets run at once. Bathrooms, laundry use, dishwashers and back-to-back morning showers all count.
- Storage systems are sized by how much heated water the tank holds and how quickly it recovers after heavy use. A couple and a family of five need very different tanks.
- Continuous flow systems are sized by flow rate, meaning how much hot water they can deliver at once when two showers and a kitchen tap are running.
- Small businesses such as salons and cafés may need a larger system, or more than one unit, to handle busy periods.
Undersizing means cold showers and unhappy tenants. Oversizing means paying to keep water hot that nobody uses. Both are common and both are avoidable. We count fixtures, ask about routines and look at the site before recommending a size, because an on-site visit catches things a phone call cannot.
Your existing gas, electrical supply and outdoor space shape which new system is practical. Staying with the same energy source usually keeps installation simple. Changing energy source may mean gas line work, a new electrical circuit or rerouted pipework.
Typical Adelaide scenarios play out like this:
- Older homes in Prospect or Unley often have an external gas or electric tank that has been in place for many years. A like-for-like replacement keeps things straightforward.
- Inner-suburban renovations sometimes move the system to free up yard space, which can add pipework and possibly a change of energy source.
- Investment properties usually favour a proven, easy-to-operate system with minimal downtime between tenants.
Before you commit to a system type, let us inspect what is already there. Our licensed gas fitters and electricians can confirm what each option would need.
Every hot water system type has a different balance of purchase cost, running cost and expected life. Electric storage is usually the simplest to install but can cost more to run unless paired with an off-peak tariff or rooftop solar. Gas suits homes already connected. Heat pumps and solar cost more up front but are designed to use less energy over their lifetime.
Factors that affect long-term value in Adelaide include:
- Your electricity and gas tariffs, and when you use hot water
- Local water conditions and the maintenance a system will need
- Parts and service support for the brand you choose
Your plans for the property matter too. A landlord selling in a couple of years may prioritise a lower upfront cost, while a family planning to stay for the long haul often benefits from a system with lower running costs. We talk through these trade-offs honestly and give you a fixed price for each option you are considering.
Flexible hoses under kitchen sinks and vanities, dishwasher connections and basin wastes are common failure points, and they can fail without warning. A leak that starts overnight or while you are away can swell cupboard bases and damage flooring.
When you call, we can talk you through closing the isolation valve or turning off the appliance. We then replace the failed hoses, valves or pipework and check for other hidden leaks.
Heavy Adelaide downpours test gutters, downpipes and stormwater drainage. Blocked downpipes, overflowing gutters and failed flashings can send water through ceilings and into insulation.
In a storm, we focus on making things safe: clearing blocked downpipes and drains and restoring drainage flow. Once conditions allow, follow-up repairs can be arranged through our leaking roof repairs and blocked stormwater drain teams.
The right capacity depends on how many people use hot water, when they use it and how many outlets run at once. Bathrooms, laundry use, dishwashers and back-to-back morning showers all count.
- Storage systemsare sized by how much heated water the tank holds and how quickly it recovers after heavy use. A couple and a family of five need very different tanks.
- Continuous flow systemsare sized by flow rate, meaning how much hot water they can deliver at once when two showers and a kitchen tap are running.
- Small businessessuch as salons and cafés may need a larger system, or more than one unit, to handle busy periods.
Undersizing means cold showers and unhappy tenants. Oversizing means paying to keep water hot that nobody uses. Both are common and both are avoidable. We count fixtures, ask about routines and look at the site before recommending a size, because an on-site visit catches things a phone call cannot.
Complete loss of hot water is the most urgent-feeling fault for most households, and the cause depends on the system:
- Electric systems: a tripped breaker or safety switch, a failed element or a faulty thermostat.
- Gas systems: a pilot that has gone out, an ignition fault or a gas supply problem.
- Solar and heat pump systems: a failed booster element, a control fault or a compressor or fan problem.
Before calling, you can safely check that the breaker has not tripped, that the gas is on and other gas appliances work, and that there is no water pooling around the unit. If nothing obvious turns up, call (08) 7282 0809. Typical repairs include relighting and testing gas controls, replacing elements or thermostats, and fixing wiring or ignition faults.
Showers turning cold halfway through, water swinging between hot and cold, or hot water running out sooner than it used to all point to faults we can diagnose. Common causes include a faulty thermostat, a stuck tempering valve, sediment taking up space in the tank, or a household that has outgrown its system.
We measure outlet temperatures at several fixtures, test valve operation, check thermostat settings and compare capacity with real demand. Often a targeted repair restores reliable hot water. If the system is simply too small, we explain both options so you can decide.
Hot water leaks range from a slow drip at a fitting to a steady flow from the relief valve to water escaping through a corroded tank body, and each tells a different story:
- A dripping fitting or valve usually needs tightening or a replacement part.
- A relief valve discharging water may mean excess pressure, a faulty valve or scale.
- Rust on the tank body or water pooling underneath usually means the tank itself has failed.
If your hot water system is leaking right now:
- Turn off the cold water isolation valve to the unit.
- Switch off power at the circuit breaker for electric units, or turn off the gas for gas units.
- Move belongings away from the water.
- Call our 24/7 emergency service on (08) 7282 0809.
Valve and fitting leaks can usually be repaired. A leak through the tank body generally means the unit has reached the end of its life and needs replacing.
Early warning signs often appear well before a complete failure:
- Rumbling or banging usually means sediment has built up beneath the element or burner.
- A metallic smell from hot taps can mean the anode is used up and corrosion has begun. A rotten-egg smell is rarer and can point to bacteria in a system stored too cool.
- Brown, rusty or cloudy hot water on the hot side only suggests corrosion inside the tank or connected pipework.
At this stage, a flush, valve service or anode replacement can often extend the life of the system, which is usually simpler than an emergency replacement later.
Hot Water Problems Northway Fixes Every Day
These are the hot water problems Adelaide homeowners and property managers describe to us most often. Each one is handled with same-day service where possible, fixed prices up front, a lifetime guarantee on workmanship, and a seniors discount on standard pricing.
No Hot Water At All
Complete loss of hot water is the most urgent-feeling fault for most households, and the cause depends on the system:
- Electric systems: a tripped breaker or safety switch, a failed element or a faulty thermostat.
- Gas systems: a pilot that has gone out, an ignition fault or a gas supply problem.
- Solar and heat pump systems: a failed booster element, a control fault or a compressor or fan problem.
Before calling, you can safely check that the breaker has not tripped, that the gas is on and other gas appliances work, and that there is no water pooling around the unit. If nothing obvious turns up, call (08) 7282 0809. Typical repairs include relighting and testing gas controls, replacing elements or thermostats, and fixing wiring or ignition faults.
Inconsistent Temperature Or Running Out Of Hot Water
Showers turning cold halfway through, water swinging between hot and cold, or hot water running out sooner than it used to all point to faults we can diagnose. Common causes include a faulty thermostat, a stuck tempering valve, sediment taking up space in the tank, or a household that has outgrown its system.
We measure outlet temperatures at several fixtures, test valve operation, check thermostat settings and compare capacity with real demand. Often a targeted repair restores reliable hot water. If the system is simply too small, we explain both options so you can decide.
Leaking Hot Water Systems And Water Damage Risks
Hot water leaks range from a slow drip at a fitting to a steady flow from the relief valve to water escaping through a corroded tank body, and each tells a different story:
- A dripping fitting or valve usually needs tightening or a replacement part.
- A relief valve discharging water may mean excess pressure, a faulty valve or scale.
- Rust on the tank body or water pooling underneath usually means the tank itself has failed.
If your hot water system is leaking right now:
- Turn off the cold water isolation valve to the unit.
- Switch off power at the circuit breaker for electric units, or turn off the gas for gas units.
- Move belongings away from the water.
- Call our 24/7 emergency service on (08) 7282 0809.
Valve and fitting leaks can usually be repaired. A leak through the tank body generally means the unit has reached the end of its life and needs replacing.
Strange Noises, Smells Or Discoloured Water
Early warning signs often appear well before a complete failure:
- Rumbling or banging usually means sediment has built up beneath the element or burner.
- A metallic smell from hot taps can mean the anode is used up and corrosion has begun. A rotten-egg smell is rarer and can point to bacteria in a system stored too cool.
- Brown, rusty or cloudy hot water on the hot side only suggests corrosion inside the tank or connected pipework.
At this stage, a flush, valve service or anode replacement can often extend the life of the system, which is usually simpler than an emergency replacement later.
Call (08) 7282 0809 or send an enquiry.Tell us the problem and, if you know them, the system type and brand.
We arrange attendance. Same-day service where possible, or our 24/7 emergency service for major leaks, complete loss of hot water or urgent tenant situations.
Diagnosis on site. We inspect the unit and check gas connections, electrical supply, valves and the tank or heat exchanger.
Step-by-Step: From Phone Call to Completed Repair
Fixed price up front. We explain the recommended repair, any alternatives and the fixed price for each before we start.
Repair and testing. We replace the failed parts and test temperature and pressure at several fixtures.
Walk-through. We explain what we found, what we did and how to help the system last.
07
Clean-up and handover. We explain how to use and care for the system and hand over the manufacturer’s documentation.
For rental properties, we keep property managers and landlords informed with clear fault descriptions, repair options and job notes.
Our hot water repair process is built to get you back to hot showers with no surprises on price. Every repair is carried out by our licensed team under Licence PGE 327229.
Step-By-Step Repair Process
How Our Hot Water Repair Service Works
Our hot water repair process is built to get you back to hot showers with no surprises on price. Every repair is carried out by our licensed team under Licence PGE 327229.
Step-By-Step Repair Process
01
Call (08) 7282 0809 or send an enquiry. Tell us the problem and, if you know them, the system type and brand.
02
We arrange attendance. Same-day service where possible, or our 24/7 emergency service for major leaks, complete loss of hot water or urgent tenant situations.
03
Diagnosis on site. We inspect the unit and check gas connections, electrical supply, valves and the tank or heat exchanger.
04
Fixed price up front. We explain the recommended repair, any alternatives and the fixed price for each before we start.
05
Repair and testing. We replace the failed parts and test temperature and pressure at several fixtures.
06
Walk-through. We explain what we found, what we did and how to help the system last.
For rental properties, we keep property managers and landlords informed with clear fault descriptions, repair options and job notes.
A household grows, a bathroom is added, or a business brings in a commercial dishwasher, and the old system cannot keep up. Northway assesses actual use, checks the existing capacity and recommends a correctly sized new system. In many Adelaide homes, a change of size or technology at replacement time ends years of frustration in a single job.
Storage tanks in long-held Adelaide homes corrode over time, especially where mineral-rich water has worked on the lining and anode for many years. Warning signs include rusty water, dampness at the base, falling temperature and safety devices that keep tripping. We start with a safety check and give you honest advice. When replacement is the right call, we plan a clean changeover and aim to remove the old unit and install the new one in a single visit.
Repeated faults or a steady climb in energy bills often mean a system is nearing the end of its useful life. Patch repairs can keep it going, but each call-out adds up and the inefficiency remains. A new, more efficient system such as a heat pump or solar unit may be the better long-term choice, and we compare the options openly so you can choose what suits your budget and plans.
Hot water failing on a Sunday night, or a relief valve flooding a rental laundry at midnight, are the calls our 24/7 emergency service is there for. When you call (08) 7282 0809 after hours, it helps to have ready:
- The system type (gas, electric, heat pump or solar) and brand if known
- What is happening (no hot water, a leak, strange noises)
- Whether anyone vulnerable is in the home, such as young children, older people or anyone unwell
Emergency attendance focuses on making things safe, stopping water damage and restoring hot water where we can. If parts or follow-up work are needed, we book that in promptly and confirm the price before we proceed.
Tenants want hot water back, landlords want a fair price and a lasting fix, and property managers want clear records and quick turnaround. Northway Plumbing, Aircon & Electrical supports all three with clear fault descriptions, fixed prices up front so owners can approve quickly, and job notes for the property file. Working with the same family business over the long term means consistent standards from one job to the next.
An older water heater may still be running even when parts for it are hard to find. We try to source suitable parts where it is safe and practical to do so. When repeated repairs would not be good value, or a repair risks another failure soon after, we say so plainly and explain why the system has reached the end of its useful life. Every recommendation is based on safety, reliability and long-term value.
Common Hot Water Repair Challenges And How We Solve Them
Every property is different, but three repair situations come up again and again across Adelaide.
After-Hours And Weekend Breakdowns
Hot water failing on a Sunday night, or a relief valve flooding a rental laundry at midnight, are the calls our 24/7 emergency service is there for. When you call (08) 7282 0809 after hours, it helps to have ready:
- The system type (gas, electric, heat pump or solar) and brand if known
- What is happening (no hot water, a leak, strange noises)
- Whether anyone vulnerable is in the home, such as young children, older people or anyone unwell
Emergency attendance focuses on making things safe, stopping water damage and restoring hot water where we can. If parts or follow-up work are needed, we book that in promptly and confirm the price before we proceed.
Coordinating Repairs For Rental And Strata Properties
Tenants want hot water back, landlords want a fair price and a lasting fix, and property managers want clear records and quick turnaround. Northway Plumbing, Aircon & Electrical supports all three with clear fault descriptions, fixed prices up front so owners can approve quickly, and job notes for the property file. Working with the same family business over the long term means consistent standards from one job to the next.
Older Systems With Limited Spare Parts
An older water heater may still be running even when parts for it are hard to find. We try to source suitable parts where it is safe and practical to do so. When repeated repairs would not be good value, or a repair risks another failure soon after, we say so plainly and explain why the system has reached the end of its useful life. Every recommendation is based on safety, reliability and long-term value.
Hot Water Repair Reviews From Adelaide Customers
Sharm E.
"Honest and reasonably priced plumbing service. I was getting sick of plumbers trying to rip me off... but there was none of that with Northway. Craig was fantastic and actually listened to me and repaired my hot water service."
Ratna S.
"Fast & friendly team, shout-out to Brett that solved our hot water issues effectively & efficiently. Job well done, thank-you!"
Lisa N.
"Northway are so easy to deal with and Craig got our hot water back to hot easily."
Matt M.
"Quick and efficient with great workmanship."
Choosing the right hot water system in Adelaide means matching type and capacity to your property and the way you use hot water, then having it installed properly by a licensed team. Energy source, household size, local water and total cost of ownership are the factors that matter most.
Here are your next steps:
We service all suburbs of Adelaide. The right new system can look very different from one street to the next: a replacement tank on a narrow side path in Norwood, a compact wall-mounted unit for a Mawson Lakes townhouse, a solar setup on a north-facing roof in Golden Grove, or a heat pump for an all-electric home in Seaford. Whether you are in the eastern suburbs, the beachside west, the northern growth corridor, the south or the Adelaide Hills around Stirling and Mount Barker, we know the local conditions your new system will face.
- Make the area safe by turning off water, gas or power if there is a leak or electrical concern.
- Note what is happening and, if you can, the system type and brand.
- Call Northway Plumbing, Aircon & Electrical on(08) 7282 0809to arrange hot water repairs anywhere in Adelaide.
- Talk through repair options and timing with our team, including the seniors discount on standard pricing if it applies.
If your current system has already failed, our 24/7 emergency service can help restore hot water as quickly as possible.
We service all suburbs of Adelaide. Our team repairs hot water in coastal homes around Glenelg, Semaphore and Brighton where salt air takes a toll, in older character homes across Unley, Prospect and Norwood, in family suburbs such as Modbury, Tea Tree Gully and Salisbury, in the south around Marion and Morphett Vale, and up into the Adelaide Hills around Stirling and Mount Barker.
Most hot water problems in Adelaide can be repaired when a licensed plumber diagnoses the fault early and fixes it properly. Northway Plumbing, Aircon & Electrical brings four generations of experience to every repair, with fixed prices up front and a lifetime guarantee on workmanship.
Your next steps:
Hot Water Repairs Across All Adelaide Suburbs
We service all suburbs of Adelaide. Our team repairs hot water in coastal homes around Glenelg, Semaphore and Brighton where salt air takes a toll, in older character homes across Unley, Prospect and Norwood, in family suburbs such as Modbury, Tea Tree Gully and Salisbury, in the south around Marion and Morphett Vale, and up into the Adelaide Hills around Stirling and Mount Barker.
Next Steps
Most hot water problems in Adelaide can be repaired when a licensed plumber diagnoses the fault early and fixes it properly. Northway Plumbing, Aircon & Electrical brings four generations of experience to every repair, with fixed prices up front and a lifetime guarantee on workmanship.
Your next steps:
- Make the area safe by turning off water, gas or power if there is a leak or electrical concern.
- Note what is happening and, if you can, the system type and brand.
- Call Northway Plumbing, Aircon & Electrical on (08) 7282 0809 to arrange hot water repairs anywhere in Adelaide.
- Talk through repair options and timing with our team, including the seniors discount on standard pricing if it applies.
FAQs about Hot Water Repairs in Adelaide
Why has my hot water suddenly gone cold?
A sudden loss of hot water usually comes from a tripped breaker, a failed element or thermostat in an electric system, or a pilot, ignition or gas supply fault in a gas system. Solar and heat pump systems can lose output when a booster or control fails. Check the breaker and gas supply first. If they are fine, call Northway on (08) 7282 0809 and our licensed team will diagnose the fault.Can you repair all brands of hot water system?
Yes. Northway Plumbing, Aircon & Electrical repairs all major brands found in Adelaide, including Rheem, Rinnai, Dux, Bosch, Chromagen, Vulcan and Stiebel Eltron, across gas, electric, continuous flow, solar and heat pump systems. If you know the brand and model, tell us when you call so we can bring the most likely parts. If a unit is unsafe or not worth repairing, we will explain why.Is my leaking hot water system worth repairing?
It depends on where the leak is coming from. Leaks from valves, fittings and connections can usually be repaired. Water escaping through the tank body generally means internal corrosion has failed the tank, and replacement is the practical option. Northway inspects the source of the leak, explains what we find, and gives you a fixed price up front for each realistic option.Are your hot water repairs guaranteed?
Yes. Every hot water repair by Northway Plumbing, Aircon & Electrical comes with our lifetime guarantee on workmanship. Replacement parts carry their own manufacturer warranties, which we explain at the time of the repair. Because we give fixed prices up front, you know the total before any work begins.Do you offer emergency hot water repairs at night and on weekends?
Yes. Our 24/7 emergency service covers urgent hot water problems such as major leaks, burst relief valves and complete loss of hot water, at any hour and on any day. Emergency visits focus on making the system safe, stopping water damage and restoring hot water where possible. Call (08) 7282 0809 and tell us what is happening.
